Top Private Universities Offering the Best Electrical & Electronic Engineering Degree Courses Accredited by the Board of Engineers Malaysia (BEM)


Best Private Universities in Malaysia Offering First Rate Electrical & Electronic Engineering Degree Courses Accredited by the Board of Engineers Malaysia (BEM)

Written by EduSpiral Consultant Services For more information contact 01111408838

Electronics engineering deals with devices and systems that use small amounts of electrical energy to analyse, transmit and store information. Transmission of these electronic signals forms the basis of communications and the information technology industry, and includes the field of microelectronics and the use of silicon chip technology.

Electrical engineering is concerned with the basic forms of energy that run our world. Whether it’s gas, hydro, turbine, fuel cell, solar, geothermal, or wind energy, electrical engineers deal with distributing these energies from their sources to our homes, factories, offices, hospitals, and schools.

In order to have a successful career as an electrical & electronics engineer, students after SPM, O-Levels, UEC, A-Levels or STPM must choose to study at the best private universities in Malaysia that’s accredited by MQA and the Board of Engineers Malaysia (BEM).

Students after SPM or O-Levels may go for the Foundation in Engineering at top private universities in Malaysia for 1 year before continuing on to the 4-year Electrical & Electronic Engineering degree. With 3 credits in SPM or O-Levels including Maths & Science, students may go for the 2-year Diploma in Electrical & Electronic Engineering and then enter into Year 2 of the Engineering degree. Pre-University students with the relevant results in STPM, A-Levels, SAM, CPU, AUSMAT, etc. can enter directly into Year 1 of the engineering degree.

Students should choose top private universities in Malaysia for their electrical & electronic engineering education so that you can gain the best knowledge and skills for a successful career.

For more information contact 01111408838

Please fill up the form for more information. If you do not give your mobile number or full name as in IC, your query will not be answered. Please make sure you give a correct email address and check your email including the SPAM or JUNK email folder within 48 hours as we will email you the information. 

Study at the Best Private Universities in Malaysia for Electrical & Electronic Engineering that’s Accredited by the Board of Engineers Malaysia

In order to succeed as an Electrical & Electronic Engineer in Malaysia, students should choose the best private universities in

School of Engineering & Science at Curtin University Sarawak

School of Engineering & Science at Curtin University Sarawak

Malaysia to study Electrical & Electronic Engineering so that you can gain the necessary knowledge and skills. Students after SPM or UEC, should visit the universities’ campuses to look at the facilities and talk to the lecturers to gauge their experience.

The Electrical & Electronic Engineering degrees at the top private universities in Malaysia should be accredited by MQA and also the Board of Engineers Malaysia (BEM).

The Engineering Degrees of these universities are accredited by the Board of Engineers Malaysia (BEM) which is a signatory to the Washington Accord. This accreditation ensures that Engineering Graduates will have the following benefits in countries who are signatories of the Washington Accord:

  • Opportunities to register as a Graduate Engineer with Board of Engineers Malaysia (BEM) or the relevant professional bodies in other countries who are signatories under the Washington Accord.
  • Pathways to becoming a Professional or Chartered Engineer.
  • Assurance that graduates are considered as having met international academic standards for engineering practice.
Heriot-Watt University Malaysia is a top ranking UK university for Engineering

Heriot-Watt University Malaysia is a top ranking UK university for Engineering

Other than the academic quality of the universities, students must seriously consider the student environment. Research has shown that employers have rejected 56% of job interviewees because of the lack of skill in the English language.

Graduates with a strong command of the English language have also been found to earn 25% higher salaries and have faster promotions in their jobs. Therefore, in order to succeed, students should choose a private university with an English-speaking student environment to enhance their career competitiveness.

You may save a few thousand by going to a cheaper university with a non-English speaking environment, but remember, you will be getting 25% lower salary and slower promotion for the next 50 years of your work life.

Education Pathway after SPM or O-Levels to a Top Electrical & Electronic Engineering Degree in Malaysia

Best Electrical and Electronic Engineering Degree Course at Top Ranked Heriot-Watt University Malaysia

Students in Malaysia can get a top ranked UK degree in Malaysia at Heriot-Watt University Malaysia

Students in Malaysia can get a top ranked UK degree in Malaysia at Heriot-Watt University Malaysia

Students after SPM and O-Levels can enter the Foundation in Science at Heriot-Watt University Malaysia before continuing into the top rated electrical & electronic engineering degree programme. Students after UEC, STPM, A-Levels or other Pre-University programmes with the relevant results can choose to study at the best university for engineering at Heriot-Watt University Malaysia.

With thousands of graduates in Electrical and Electronic Engineering coming out each year, it is important to set yourself apart from the rest to secure a job with an excellent career.

Heriot-Watt was ranked fourth in Scotland in the 2016 Complete University Guide. Heriot Watt University ranked 9th for Electrical & Electronic Engineering. Heriot-Watt University’s Ranking in the Guardian University Guide 2016 is 18th in the UK and 2nd in Scotland. Heriot-Watt University is ranked 3rd for Electronic and Electrical Engineering.

Students can now obtain a top ranked UK university Electrical and Electronic Engineering degree in Malaysia from Heriot-Watt University Malaysia. Heriot-Watt University Malaysia is the best university of choice to study Electrical and Electronic Engineering in Malaysia with its excellent academics, top notch facilities, strategic location, and student experience. The new state-of-the-art campus at Putrajaya is set to produce top engineers in the coming years.

Heriot-Watt University is ranked top in the UK for Business, Actuarial & Engineering courses

Heriot-Watt University is ranked top in the UK for Business, Actuarial & Engineering courses

Electrical and electronic engineering play a significant role in modern society. From the electricity that powers our lives to the mobile phones that enable communication and provide entertainment, the technologies around us inspire wonder.

Highly trained engineers are needed to specify and design such systems and devise electronic engineering solutions for future challenges – such as electric transportation, renewable energy generation, robot systems and medical diagnostics. A Bachelor of Engineering degree can provide access to exciting global opportunities.

MEng Electrical Engineering

Top students from all over Malaysia study at Heriot-Watt University Malaysia

Top students from all over Malaysia study at Heriot-Watt University Malaysia

BEng students who meet the progression requirements for the MEng programme may transfer programmes at the end of the second year.

Teaching and Assessment

Teaching methods range from lectures, tutorial classes and mentor sessions, to work-shop and laboratory activities supported by group and individual projects. Assessment is by examination, coursework, presentations, group project and individual project, the balance being appropriate to the different teaching methods used in the courses.

Career opportunities

The BEng and MEng degrees provide a broad education as well as an appropriate measure of specialisation in Advanced Electronic, Electrical and Computer Systems. Graduates enjoy excellent employment prospects throughout industry, financial organisations, government and the professions and are well qualified to join research teams.

Accreditation of the Electrical and Electronic Engineering Degree at Heriot-Watt University Malaysia

In accordance with Heriot-Watt University Malaysia’s normal practice, their professionally orientated programmes are

Mechanical Engineering lab at Heriot-Watt University Malaysia

Mechanical Engineering lab at Heriot-Watt University Malaysia

designed to meet the educational requirements for membership of relevant professional institutions.

In addition to accreditation within Malaysia, the university seeks accreditation by the relevant UK or international professional bodies in accordance with their standard procedures.

BEng graduates, with work experience and additional matching sections (higher level academic study), are eligible for accreditation by the Institution of Mechanical Engineers in the UK.

The programme has been approved by Malaysian Qualifications Agency (MQA) and the Ministry of Education (MOE).

For registration by Board of Engineers Malaysia (BEM) a four year undergraduate MEng programme is required. In addition, relevant work experience is required for accreditation by the Institution of Mechanical Engineers in the UK.

Entry requirements for Electrical and Electronic Engineering at Heriot-Watt University Malaysia

Mechanical Engineering lab at Heriot-Watt University Malaysia

Mechanical Engineering lab at Heriot-Watt University Malaysia

  • Heriot-Watt University Malaysia Foundation in Science: CCCC
  • GCE A-Level: BBB
  • STPM: BBB
  • Diploma deemed recognised by the Malaysian Government
  • Any other relevant qualification deemed recognised by the Malaysian Government.

The subjects studied must include Mathematics and Physics.

English language requirements

  • If English is not your first language, then evidence of proficiency equivalent to IELTS 6 is required.

Students interested in registering at Heriot-Watt University Malaysia, please go to this link.

Year 1 Subjects for the Electrical and Electronic Engineering Degree at Heriot-Watt University Malaysia

Library at Heriot-Watt University Malaysia

Library at Heriot-Watt University Malaysia

  • Circuits and Analysis
  • Digital design and programming
  • Mathematics for engineers and scientists 3
  • Business awareness, safety and sustainability
  • Mathematics for Engineers and Scientist 4
  • Electromechanical Systems
  • Signals and Systems
  • Computer Architecture and Embedded Systems

Year 2 Subjects for the Electrical and Electronic Engineering Degree at Heriot-Watt University Malaysia

Heriot-Watt University is rated top in the UK for student experience

Heriot-Watt University is rated top in the UK for student experience

  • Physical Electronics and Semiconductors
  • System Projects
  • Engineering Mathematics and Statistics 3
  • Time and Frequency Signal Analysis
  • Analogue Electronics
  • Electrical Energy Systems
  • Electromagnetism

Year 3 Subjects for the Electrical and Electronic Engineering Degree at Heriot-Watt University Malaysia

Learn in an intellectually stimulating environment with top students at Heriot-Watt University Malaysia

Learn in an intellectually stimulating environment with top students at Heriot-Watt University Malaysia

The BEng and MEng programmes differ in year 3:
– BEng students do core individual projects plus three optional courses in semester 1 and two in semester 2.

– MEng students do core group projects plus two optional courses in each semester.

– MEng students undertake a compulsory industrial training placement.

  • „MEng Group Project 1
  • „„MEng Professional and Industrial Studies
  • „„BEng Project 1
  • „„plus optional courses in semester 1
  • „„BEng Project 2
  • „„MEng Group Project 2
  • „plus optional courses in semester 2
    Industrial Training

Fourth Year for the MEng Electrical and Electronic Engineering at Heriot-Watt University Malaysia

MEng ONLY

Project placement or research plus four optional courses in semester 2.

Accreditation for the Electrical and Electronic Engineering Degree at Heriot-Watt University Malaysia

Heriot-Watt University is a new state-of-the-art campus strategically located in the modern city of Putrajaya

Heriot-Watt University is a new state-of-the-art campus strategically located in the modern city of Putrajaya

It is intended that accreditation by the Institution of Engineering and Technology (IET) will be sought in 2019, when the first cohort of MEng students will have graduated. If the degree programmes meet IET accreditation criteria then the qualifications will be accredited at either Bachelor or Masters level to include all cohort entry dates so far. For further information please contact the School.

Our degrees are offered as 3 year BEng (Bachelor of Engineering) or 4 year MEng (Master of Engineering) qualifications. Our MEng qualification is designed to satisfy the academic requirements set by the Engineering Council UK for registration as a Chartered Engineer (CEng).

Chartered Engineers enjoy excellent prospects, enhanced employability and high salaries. If you prefer to graduate with a BEng after 3 years of study your degree will provide partial fulfilment of the necessary academic requirements for Chartered Engineer Status.

Board of Engineers Malaysia (BEM) Accredited Bachelor of Engineering (Hons) in Electrical & Electronic Engineering course at Asia Pacific University (APU)

Asia Pacific University (APU) is ranked Tier 5 or "Excellent" in the SETARA 2013 rating by MQA. APU is now operating at its new iconic campus at Technology Park Malaysia, Kuala Lumpur.

Asia Pacific University (APU) is ranked Tier 5 or “Excellent” in the SETARA 2013 rating by MQA. APU is now operating at its new iconic campus at Technology Park Malaysia, Kuala Lumpur.

The B. Eng (Hons) in Electrical & Electronic Engineering programme at Asia Pacific University is specifically designed to provide:

  • High-quality undergraduate engineering education by providing students with a curriculum that is firmly grounded in electrical & electronic engineering fundamentals.
  • A study in both the areas of electronics fundamentals as well as electrical power systems including the areas of generation, transmission and distribution of electrical energy.
  • The technical skills required for the application in the fields of communication and the IT industry through a well balanced curriculum which includes the study of signals and computing.

Admission Requirements for the B. Eng (Hons) in Electrical & Electronic Engineering programme at Asia Pacific University

Asia Pacific University is a top ranked university in Malaysia with its new campus at Technology Park Malaysia. An impressive 95% of APU's graduates obtain jobs before graduation

Asia Pacific University is a top ranked university in Malaysia with its new campus at Technology Park Malaysia. An impressive 95% of APU’s graduates obtain jobs before graduation

  • Pass STPM with at least principal / full pass / grade C (CGPA 2.0) in Mathematics and Physics or Chemistry and pass SPM with credit in Mathematics and one of the relevant Science subjects – Physics / Chemistry / Technical / Vocational; OR
  • Pass ‘A’ Levels with at least a pass in Mathematics and Physics or Chemistry and pass ‘O’ Levels / GCSE or equivalent with Grade C in Mathematics and one of the science subjects – Physics or Chemistry; OR
  • Pass UEC or Senior Middle Three (SM3) with Grade B in five (5) subjects including Mathematics and one of the relevant Science subjects – Physics or Chemistry and a pass in Bahasa Malaysia; OR
  • Pass the APU Foundation or equivalent; OR
  • A qualification that APU accepts as equivalent to the above.

PROGRAMME EDUCATIONAL OBJECTIVES

Asia Pacific University has been RATED No. 1 in Asia and Malaysia for its multicultural learning experience by Student Barometer Wave 2014

Asia Pacific University has been RATED No. 1 in Asia and Malaysia for its multicultural learning experience by Student Barometer Wave 2014

Graduates of APU Bachelor of Engineering in their respective programs are expected within five years of graduation to attain the following programme educational objectives:

  • Be a practicing engineer contributing to the development of Electrical or Electronic Engineering while demonstrating professionalism.
  • Pursue engineering innovation via career advancement opportunities and/or advanced studies in Electrical or Electronic Engineering.

An Electrical Engineer may be responsible for research, design , development, manufacturing and management of complex hardware and software systems and reliable, cost effective devices, many involving the use of new information and computer intensive technologies. These include:

  • Integrated electronic systems
  • Renewable energy systems
  • Generation, transmission and distribution of electrical power
  • Instrumentation in electrical and electronic systems
  • Manufacturing
  • Microelectronics
  • Photoelectronics

Programme Outcomes for the B. Eng (Hons) in Electrical & Electronic Engineering programme at Asia Pacific University

Engineering lab at Asia Pacific University

Engineering lab at Asia Pacific University

The students, upon completion of their study, should attain the following outcomes:

  • Ability to gain and apply principles of Mathematics, Science and Engineering.
  • Ability to identify engineering problems and apply engineering principles to solve them.
  • Ability to recognize and apply suitable tools and techniques for engineering practical applications.
  • Ability to investigate complex engineering problems using research techniques.
  • Ability to design innovative solutions for complex engineering problems.
  • Ability to communicate effectively and professionally.
  • Ability to comprehend and demonstrate current good practices of engineering for sustainable
  • development and environmental considerations.
  • Ability to practice safety, health, social, cultural and legal responsibilities as an engineer.
  • Ability to execute the responsibilities of an Engineer professionally and ethically.
  • Ability to function effectively as a team leader or a member in a team.
  • Ability to recognize the need for, and be able to engage in independent and life-long learning towards continuous professional development.
  • Ability to demonstrate and apply the knowledge and understanding of engineering management and finance.

Year 1 Subjects for the B. Eng (Hons) in Electrical & Electronic Engineering programme at Asia Pacific University

The Engineering degree programmes at Asia Pacific University are accredited by MQA and the Board of Engineers Malaysia (BEM)

The Engineering degree programmes at Asia Pacific University are accredited by MQA and the Board of Engineers Malaysia (BEM)

These modules provide an appropriate platform for an Engineering Professional to understand the basic principles of engineering in the areas of Circuit Analysis, Engineering Materials, Engineering Statics & Dynamics and Engineering Design. In addition, a thorough grounding in principles of IT and management are provided by the Programming and Management modules. Modules such as Engineering Mathematics and Introduction to Management provide the basic academic skills required to meet the demands of employers. Important and relevant skills for managing activities and for your own independent learning are also introduced.

Common Modules

  • Analysis of Circuits
  • Engineering Materials
  • Introduction to Management

    Engineering lab at Asia Pacific University

    Engineering lab at Asia Pacific University

  • Engineering Mathematics 1
  • Introduction to C Programming
  • Engineering Mathematics 2
  • Instrumentation & Measurement
  • Engineering Design

Specialised Modules

  • Engineering Statics & Dynamics

In addition to the above, all students are also required to successfully complete General Studies modules as stipulated by the Malaysian Qualification Agency, as well as fulfill credit requirements for Co-Curricular Activities.

Year 2 Subjects for the B. Eng (Hons) in Electrical & Electronic Engineering programme at Asia Pacific University

Engineering lab at Asia Pacific University

Engineering lab at Asia Pacific University

Here, you start specialising in modules that develop the necessary underlying knowledge and skills in Electrical and Electronics Engineering. Further, in-depth Electrical and Electronic skills are developed here with modules such as Electromagnetic Field Theory, Engineering Software & Applications, Analogue Electronics, Digital Electronics, Signals & Linear Systems, Electrical Machines 1& 2 and Electrical Power Utilisation. Engineering Mathematics is provided for the better understanding of the engineering modules.

Common Modules

  • Analogue Electronics

    Asia Pacific University is ranked Tier 5 or Excellent in the SETARA 2013 and offers students top rated facilities at their new campus

    Asia Pacific University is ranked Tier 5 or Excellent in the SETARA 2013 and offers students top rated facilities at their new campus

  • Engineering Mathematics 3
  • Electromagnetic Field Theory
  • Digital Electronics
  • Engineering Software & Applications
  • Signals & Linear Systems

Specialised Modules

  • Electrical Machines 1
  • Electrical Power Utilization
  • Electrical Machines 2

Year 3 Subjects for the B. Eng (Hons) in Electrical & Electronic Engineering programme at Asia Pacific University

Engineering lab at Asia Pacific University

Engineering lab at Asia Pacific University

Specialised knowledge and skills in the areas of Control Engineering, Communication Engineering Principles, Multimedia Applications, Computer Architecture, Microprocessor Systems & Embedded Software, Digital Signal Processing, Numerical Methods & Statistics, Power Electronic & Drives, Power System Analysis and Generation, Transmission & Distribution of Electrical Power are a critical focus of this level. There is further development of the ability to apply relevant engineering skills with strong critical thinking and analysis.

Independent learning continues in all modules.

Common Modules

Engineering lab at Asia Pacific University

Engineering lab at Asia Pacific University

  • Control Engineering
  • Communication Engineering Principles
  • Multimedia Applications
  • Computer Architecture
  • Numerical Methods & Statistics
  • Microprocessor Systems & Embedded Software

Specialised Modules

  • Power System Analysis
  • Generation, Transmission & Distribution of Electrical Power
  • Power Electronics & Drives

Electives (Choose 1)

Digital Signal Processing
Product Creation Technology

Internship

Industry placement with a suitable organisation for a minimum period of 12 weeks, after completing Year 3 and before the commencement of Year 4.

Year 4 Subjects for the B. Eng (Hons) in Electrical & Electronic Engineering programme at Asia Pacific University

Electrical & Electronic Engineering lab at Asia Pacific University

Electrical & Electronic Engineering lab at Asia Pacific University

The final year Engineering modules provide the necessary industry application technological skills which will become very useful for employment upon graduation. These modules include, VLSI Design, Analogue Integrated Circuits & Systems, and High Voltage Engineering. Your personal and professional development is enhanced by the module in Engineer in Society and Engineering Project Management. You will enhance your technical capability and understand how to innovate, generate and manage the creation of new ideas.

The Project Phase I (Investigation) in Electrical and Electronics Engineering will enable students to take on R&D with commercialisation. The Electrical and Electronics Engineering Project Phase II (Implementation) also develops the academic and practical aspects of your chosen areas of study and reinforces your independent learning skills. This is where you will demonstrate higher level critical thinking, analysis and solutions development skills which will enhance your employability.

Engineering lab at Asia Pacific University

Engineering lab at Asia Pacific University

Common Modules

  • Engineering Project Management
  • Project Phase I (Investigation)
  • Project Phase II (Implementation)
  • Group Engineering Design Project
  • Engineer in Society

Specialised Modules

  • High Voltage Engineering
  • Analogue Integrated Circuits & Systems

Electives (Choose one)

  • VLSI Design
  • Optical Communication and Networks

CAREERS IN ELECTRICAL AND ELECTRONIC ENGINEERING

From geographical information systems that can continuously provide the location of a vehicle to giant electric power generators, electrical and electronics engineers are responsible for a wide range of technologies. A degree in Electrical & Electronics Engineering offers challenging opportunities over a wide range of activities from research and design to operations, management and planning. Career choices are in diverse areas such as Power Systems, Electrical equipment manufacturing and testing, Biomedical Engineering and Computer Systems Engineering and also as technical experts on engineering projects in the Banking and Finance Industry.

Asia Pacific University (APU) Engineering Degree Accredited by Board of Engineers Accredited (BEM)

I was not sure if I could handle engineering but after listening to EduSpiral, I was able to make the right decision. Jun Chung, Diploma in Electrical & Electronic Engineering at Asia Pacific University

I was not sure if I could handle engineering but after listening to EduSpiral, I was able to make the right decision.
Jun Chung, Diploma in Electrical & Electronic Engineering at Asia Pacific University

The Engineering Degrees of these universities are accredited by the Board of Engineers Malaysia (BEM) which is a signatory to the Washington Accord. This accreditation ensures that Engineering Graduates will have the following benefits in countries who are signatories of the Washington Accord:

  • Opportunities to register as a Graduate Engineer with Board of Engineers Malaysia (BEM) or the relevant professional bodies in other countries who are signatories under the Washington Accord.
  • Pathways to becoming a Professional or Chartered Engineer.
  • Assurance that graduates are considered as having met international academic standards for engineering practice.

Top Ranked Australian University’s Electrical & Electronic Engineering Degree at Curtin University Sarawak, Malaysia

School of Engineering & Science at Curtin University Sarawak

School of Engineering & Science at Curtin University Sarawak

Since its establishment in 1999, Curtin University, Sarawak Malaysia (Curtin Sarawak) – the largest international campus of Curtin University – has experienced exponential growth in enrolments for courses under its Bachelor of Engineering programme.

The engineering courses at Curtin University Sarawak are identical in all aspects to those offered by its Australian parent, and that they are accredited by engineering bodies both in Australia and Malaysia, and in the case of the Bachelor of Engineering (Chemical Engineering), in the United Kingdom as well.

The Electrical & Electronic Engineering degree programmes at the top ranked Curtin University Sarawak are accredited by the Board of Engineers Malaysia (BEM). Curtin Sarawak has won awards in the Electrical & Electronic engineering field as well affirming that they are one of the best private universities in Malaysia for Electrical & Electronic Engineering.

Faculty of Engineering and Science at Curtin Sarawak

Realise your dream to become a professional engineer or scientist with a Curtin degree. Curtin Sarawak’s Faculty of Engineering and Science offers Curtin’s accredited degrees in engineering and science, which are ranked amongst the world’s best. The Faculty also gives you more opportunities to use the latest technology and get involved in world-class research.

Bachelor of Engineering -BEng. (Hons.)(Electrical and Electronic) at Curtin University Sarawak

School of Engineering & Science at Curtin University Sarawak

School of Engineering & Science at Curtin University Sarawak

Electrical and electronics underpin everyday technologies, from large devices such as electric vehicles to small devices such as mobile phones and computers. In general, electrical and electronic engineering encompasses electrical power and control, electronic, telecommunication and computer systems.

There is hardly any aspect of our modern civilization that is not dependent upon electrical energy. We use this for heating, cooling, transportation, lighting, manufacturing and production to name a few areas of application. Electrical and electronic engineering involves the applications of electrical energy, together with its generation, transmission and distribution, as well as the harnessing of sources of renewable and sustainable energy.

Electronic field represents one of the fastest growing technology areas internationally and is the underlying area to many industries such as robotics and telecommunications. With the rapid progress of the information society such as the revolutionary Internet of Things (IoT), the role of electrical and electronic engineers is becoming more crucial to make tomorrow better.

First Year Subjects for the Electrical & Electronic Engineering at Curtin University Sarawak

School of Engineering & Science at Curtin University Sarawak

School of Engineering & Science at Curtin University Sarawak

The major has a common first year with all other engineering disciplines which builds a range of basic science skills and knowledge, with particular emphasis on physics, chemistry and mathematics.

Why Electrical and Electronic Engineering?

The course provides students with fundamental and state-of-art knowledge, relevant to industry with theory, computer simulation and practical components
Excellent teaching staff, many with extensive industrial experience and strong collaboration with industry players present opportunities for exposure to industry practice

Note: *Pending Ministry of Higher Education approval

Professional Recognition for the Electrical & Electronic Engineering at Curtin University Sarawak 

  • Malaysian Qualifications Agency (MQA)
  • Public Services Department (JPA)
  • Board of Engineers Malaysia (BEM)
  • Engineers Australia (EA)
  • Washington Accord

Course Structure for the Electrical & Electronic Engineering at Curtin University Sarawak

Semester UDC Unit Credits
Engineering First Year Sem 1
INDE1000 Engineering Foundation: Principles & Communication 25
MATH1002 Engineering Mathematics 1 25
ELEN1000 Electrical Systems 25
COMP1004 Engineering Programming 12.5
Select 1 Option from Elective 12.5
Sem 2 MATH1003 Engineering Mathematics 2 25
INDE1001 Engineering Foundations: Design & Processes 25
MCEN1000 Engineering Mechanics 25
MAEN1000 Engineering Materials 25
Year 2 Sem 1 ELEN2000 Electrical Circuits 25
CMPE2004 Advanced Engineering Programming 25
CMPE2001 Foundations of Digital Design 25
MATH2007 Mathematics and Probability Theory 25
Sem 2 ELEN2001 Electromagnetic and Electromechanical Energy Conversion 25
CMPE2003 Microcomputers 25
ETEN2000 Signal and Systems 25
ETEN2001 Electronic Fundamentals 25
Year 3 Sem 1 ELEN3002 Engineering Electromagnetics and Transmission Lines 25
ETEN3001 Control Systems 25
CMPE3000 Data Communications and Networking 25
ETEN3003 Power Electronics 25
Sem 2 ELEN3004 Renewable Energy Principles 25
ENEN2000 Engineering Sustainable Development 12.5
BLAW2000 Law for Engineers 12.5
ELEN3000 Electrical machine and stability 25
ELEN3001 Power System Analysis 25
Year 4 Sem 1 EEET4000 Engineering Research Project 1 25
ETEN4001 Instrumentation and Control 25
ELEN4006 Smart Grids and Renewable Energy Systems 25
Select 1 Option from Elective 25
Sem 2 EEET4001 Engineering Research Project 2 25
MGMT3000 Engineering Management 25
ELEN4001 Electric Power Transmission and Distributions 25
Select 1 Option from Elective 25
  Total Credits 800

 

Elective (Optional) Units for EEE Programme Course Structure

Year 1 Sem. 1 ENGR1000 EF: Evolution, Development, Successes & Failures 12.5
ELEN1000 Introduction to Renewable Energy 12.5
Year 4 Sem. 1 ETEN3000 Digital Signal Processing 25
COMT4003 Mobile Radio Communications 25
COMPT3002 Wireless Data Networks 25
Sem. 2 COMPT3000 Communications Engineering 25
ELEN3003 Power System Protection 25
CMPE3001 Embedded Systems Engineering 25
CMPE4003 Concurrent Systems 25
ETEN3002 Electronic Design 25

Best Electrical & Electronic Engineering Degree Programme at Taylor’s University Lakeside Campus

Taylor's University offers an excellent environment for tertiary studies in Malaysia

Taylor’s University offers an excellent environment for tertiary studies in Malaysia

Students after SPM or O-Levels with at least 5 credits including the relevant subjects may enter Taylor’s University Foundation in Engineering  for 1 year before continuing on to the Electrical & Electronic degree. Pre-University graduates in Malaysia from programmes such as UEC, STPM, A-Levels, SAM, CPU, AUSMAT and others may enter directly into the 4-year Electrical & Electronic degree providing they meet the minimum entry requirements. The Electrical & Electronic degree at Taylor’s University is accredited by MQA and the Board of Engineers Malaysia (BEM).

Taylor’s University is a top ranked private university in Malaysia with a rating of Excellent or Tier 5 in the SETARA 2013. Taylor’s University made it to the top 200 university in Asia, moving up more than 20 places to be listed as no 179. Taylor’s is also ranked no. 29 among ASEAN universities and Malaysia’s top private university among non-GLC linked private universities. During the 2016 Putra Brand Awards ceremony recently, Taylor’s University brought home the Gold award in the “Education & Learning” category. This marks the seventh year that Taylor’s has been named the sole recipient of the award. Taylor’s University is one of the best universities in Malaysia for you to study the Bachelor of Engineering (Hons) Electrical & Electronic Engineering.

Engineering lab at Taylor's University

Engineering lab at Taylor’s University

The Electrical & Electronic degree programme at Taylor’s University is designed to equip students with a sound understanding of fundamental theories and concepts in electrical and electronic engineering; from designing and manufacturing the latest consumer devices to sophisticated scientific and industrial technologies.

Through the Bachelor of Engineering programme at Taylor’s University, students will be able to design and improve electrical and electronic systems, components and processes that satisfy technical and ergonomic requirements within realistic constraints.

Students will be instilled with technical proficiency and industry knowledge, as well as the ability to apply theories into practical and feasible innovations, in a multidisciplinary environment.

4-Year Electrical & Electronic Engineering Degree Programme at Taylor’s University

Engineering lab at Taylor's University

Engineering lab at Taylor’s University

Focus on Core Expertise

  • In-depth knowledge and understanding in telecommunications via modules such as Electromagnetic Fields & Waves, Digital Signal Processing, Data Communications & Networks and Communication Systems.
  • Opportunity to enhance knowledge on designing electronic systems to control machines via elective modules such as Computer Architecture, VLSI Design and Robotics & Automation.
  • Opportunity to acquire knowledge on the use and control of electrical power for a sustainable future via elective modules such as High Voltage Engineering , Electrical Energy Utilisation and Renewable & Alternative Energies.

Exposure to Business and Management Concepts

The beautiful 27-acre Taylor's Lakeside Campus will provide all the right conditions for a vibrant exchange between academic, commercial, social and leisure activities for top students

The beautiful 27-acre Taylor’s Lakeside Campus will provide all the right conditions for a vibrant exchange between academic, commercial, social and leisure activities for top students

  • Cultivate business-minded engineers through exposure to business management modules such as Business Skills for Engineers, Managing Projects for Success and Engineering Economics.

Engineered for the Real World

  • Ability to develop and improve solutions catered to consumers’ needs through various engineering design modules.
    Ability to apply the CDIOTM Framework to engineering processes and systems, taking into consideration functionality, safety, cost effectiveness and sustainability.

Dynamic Internship Programme for the Electrical & Electronic Engineering Degree Programme at Taylors’ University

  • 12-week industrial training to develop practical and relevant skills for future employment.

Programme Structure for the Bachelor of Engineering (Hons) Electrical & Electronic degree programme at Taylor’s University

YEAR 1 Subjects for the Electrical & Electronic degree programme at Taylor’s University

Taylor's University Engineering students showing their project at the Engineering Fair

Taylor’s University Engineering students showing their project at the Engineering Fair

Semester 1

  • Engineering Mathematics I
  • Engineering Design and Communication
  • Circuits and Signals
  • Digital Electronics
  • MPU (U1) – Module 1*

Semester 2

  • Engineering Mathematics II
  • Engineering Design and Ergonomics
  • Circuits and Devices
  • Signals and Systems
  • MPU (U1) – Module 2*

YEAR 2 Subjects for the Electrical & Electronic degree programme at Taylor’s University

Engineering lab at Taylor's University

Engineering lab at Taylor’s University

Semester 3

  • Engineering Mathematics III
  • Multidisciplinary Engineering Design
  • Analogue Electronics
  • Embedded Systems
  • Computing Applications for Engineers
  • MPU (U2)*

Semester 4

  • Engineering Mathematics IV
  • Managing Projects for Success
  • Electromagnetic Fields and Waves
  • Signal and Systems
  • Real Time Instrumentation
  • Engineering Design and Innovation

YEAR 3 Subjects for the Electrical & Electronic degree programme at Taylor’s University

Taylor's University School of Engineering

Taylor’s University School of Engineering

Semester 5

  • Electrical Power and Machines
  • Control Systems
  • Electrical Engineering Group Project I
  • Integrated Electronics
  • Digital Signal Processing
  • MPU (U3)*

Semester 6

  • Business Skills for Engineers
  • Electrical Engineering Group Project II
  • Electrical Power Systems
  • Power Electronics
  • Communication Systems

Industrial Training (12 Weeks)

YEAR 4 Subjects for the Electrical & Electronic degree programme at Taylor’s University

I loved motorsports and EduSpiral gave me great advise to help guide me to achieve my dream. Justin Moo, Mechanical Engineering graduate from Taylor's University

I loved motorsports and EduSpiral gave me great advise to help guide me to achieve my dream.
Justin Moo, Mechanical Engineering graduate from Taylor’s University

Semester 7

  • Final Year Engineering Project I
  • Industrial Drives
  • Professional Engineer & Society
  • Elective
  • Elective

Semester 8

  • Final Year Engineering Project II
  • Power System Protection & Switchgear
  • MPU (U3)*
  • Elective
  • Elective

NOTE:
* The Ministry of Education (MOE) requires all students to take Mata Pelajaran Umum (MPU) (i.e. General Studies) which is categorised under U1, U2, U3 and U4 within the duration of their studies. U1 modules are prescribed by MOE whereas U2, U3 and U4 modules are from a list of University Core Modules (UCM) prescribed as per the Programme Guide.

Electives for the Electrical & Electronic degree programme at Taylor’s University

Formula Varsity Race Champion car designed by students from the School of Engineering at Taylor's University

Formula Varsity Race Champion car designed by students from the School of Engineering at Taylor’s University

The chosen elective modules should support the final year engineering project

  • Electrical Energy Utlisation
  • VLSI Design
  • Computer Architecture
  • Design of Electrical Apparatus
  • Advanced Control Systems
  • Advanced Data Communication and Network
  • Multimedia Technology and Applications
  • High Voltage Engineering
  • Microwave Engineering
  • Advanced Digital Signal Processing
  • Electric and Hydrid Electric Vehicles
  • Smart Grid
  • Renewable and Alternative Energies
  • Robotics and Automation
  • Energy Conversion Perspectives

Career Options for Electrical & Electronic Graduates from Taylor’s University

  • Appliances Engineer

    Grand Hall at Taylor's University

    Grand Hall at Taylor’s University

  • Communication Engineer
  • Computer Engineer
  • Construction Engineer
  • Control Engineer
  • Electrical and Electronics Engineer
  • Instrumentation Engineer
  • Mechatronic Engineer
  • Medical Engineer
  • Microelectronics Engineer
  • Power Engineer
  • Signal Processing Engineer
  • Software Engineer
  • Telecommunications Engineer

Achievements of Taylor’s University Engineering Students

2015

Formula Varsity Race Champion car designed by students from the School of Engineering at Taylor's University

Formula Varsity Race Champion car designed by students from the School of Engineering at Taylor’s University

  • Pang Zong Xin awarded an IEM Gold Medal 2015 – Best Final Year Engineering Student
    Winner for the Journal of Engineering Science & Technology (JESTEC) from the Ministry of Higher Education of Malaysia, under the category “Scopus” in the area of “Science, Technology & Medicine”
  • Taylor’s Racing Team ranked second in Electric Vehicle category in Formula Varsity 2015

2014

  • Taylor’s Racing Team ranked second in Educational Innovative Motorsports & Automotive Race 2014
  • Taylor’s Racing Team ranked first in Formula Time Attack – Student Category in Malaysia SuperLap 2014

2012

Taylor's University Racing Team

Taylor’s University Racing Team

  • Taylor’s Racing Team (TRT) from Taylor’s University School of Engineering (SOE) ranked Second at the Educational Innovation of Motorsports & Automotive (EIMA) Race organised by University Technology Malaysia (UTM).

2011

  • Academicians and students of School of Engineering won a gold and a bronze medal at Malaysian Technology Expo 2011.

2010

  • Taylor’s Racing Team from School of Engineering won Formula Varsity 2010.
  • Accepted and is the first and only Malaysian university thus far, as an official collaborator of the CDIO™ initiative alongside great institutions like MIT, California State University, University of Sydney, Auckland University, etc. CDIO™ (which stands for Conceive-Design-Implement-Operate) is an initiative to revitalise the Engineering education that was pioneered by MIT and it helps us provide a framework for our unique project based learning approach.
  • Taylor’s School of Computing & IT and School of Engineering win four medals at the 9th Malaysia Invention and Innovation Awards 2010.

2009

  • Taylor’s was voted the First Runner-Up “Most Popular Private College/ University in Malaysia” for Engineering. The results were based on the Malaysian Student Survey 2009 conducted by GTI and trendence, Europe’s leading consultancy on employer branding and recruitment research.

Best Board of Engineers Malaysia (BEM) Accredited Electrical & Electronic Engineering Degree at Top Ranked UCSI University

Strategically locate in Kuala Lumpur, UCSI University is ranked in the top 300 universities in Asia by QS and Rated Excellent or Tier 5 in the SETARA 2013 by MQA

Strategically locate in Kuala Lumpur, UCSI University is ranked in the top 300 universities in Asia by QS and Rated Excellent or Tier 5 in the SETARA 2013 by MQA

Top Ranked UCSI University is famous for its engineering courses and has offered the Electrical & Electronic Engineering course since 1992. UCSI University is ranked in the Top 300 Universities in Asia in 2015 by the renown QS University Rankings.  UCSI University is ranked as Excellent or Tier 5 in the SETARA 2013 rating system by MQA. The Electrical & Electronic Engineering degree at UCSI University is accredited by the Board of Engineers Malaysia (BEM).

Students after SPM or O-Levels may go for the Foundation in Science at UCSI University for 1 year before continuing on to the 4-year Electrical & Electronic Engineering degree. With 3 credits in SPM or O-Levels including Maths & Science, students may go for the 2-year Diploma in Electrical & Electronic Engineering and then enter into Year 2 of the Engineering degree. Pre-University students with the relevant results in STPM, A-Levels, SAM, CPU, AUSMAT, etc. can enter directly into Year 1 of the engineering degree.

At UCSI University, the Electrical and Electronic Engineering programme covers a tremendous array of

EduSpiral took us on a campus tour & gave in-depth information to help me decide. Eugene Ong, Electrical & Electronic Engineering at UCSI University

EduSpiral took us on a campus tour & gave in-depth information to help me decide.
Eugene Ong, Electrical & Electronic Engineering at UCSI University

courses related to both fields, ranging from basic topics such as circuits, analogue and digital devices and systems, computing, machines, communications and digital networks to more specialised topics like filter design, control, instrumentation, power, signal processing, VLSI design, and microprocessors / microcontrollers, among others.

This well-established and broad-based engineering degree programme combines theoretical studies with practical applications and problem-solving skills in the realm of engineering. The course grooms students to be well-trained individuals and exposes them to hands-on sessions with software and hardware design tools, in line with industry needs.

To foster competitiveness among graduates, students are also required to undergo industrial training under UCSI University’s Co-operative Placement Training Scheme at the end of the 2nd and 3rd academic years.

This training allows students to learn and familiarise themselves with the real-life working environment. Apart from that, students also undertake research and development projects in their final year of study.

UCSI University Bachelor of Engineering (Hons) Electrical & Electronic Engineering Programme

The duration of the programme is 4 years.

EduSpiral took me & my friend to visit APU and UCSI so that we can see the campus facilities and make a better decision about our future. Kian Yong, Mehcanical Engineering at UCSI University

EduSpiral took me & my friend to visit APU and UCSI so that we can see the campus facilities and make a better decision about our future.
Kian Yong, Mehcanical Engineering at UCSI University

In each year there are two long-semesters consisting of 14 weeks of instruction with 2 weeks of examinations, and one short-semester consisting of 7 weeks of instruction with 1 week of examinations.

The long-semesters start in January and May, while the short-semester starts in September.

In the months of November & December students undergo industrial training under the Co-Operative Placement Scheme to learn and to familiarize themselves with real life working environment. In addition, students also undertake a research and development project in their final year.

The number of contact hours per courses per week depends on the credit and teaching methodology of each course. Each credit is approximately equivalent to 1 hour of class, or 2 hours of labs per week.

The teaching and learning strategies and assessment are designed depending on and according to the nature of subject or topic being taught or investigated.

The school of Engineering implements different methods and styles of teaching and learning and assessment to ensure the successful achievement of the learning outcomes of its programmes, that includes

  • Ordinary classroom lectures
  • Group tutorials
  • Laboratory works
  • Seminars and eforums
  • Directed and self learning
  • Invited guest lectures
  • Industrial visits

UCSI University Engineering Degree Accredited by Board of Engineers Accredited (BEM)

The engineering degree programmes at UCSI University are accredited by the Board of Engineers Malaysia

The engineering degree programmes at UCSI University are accredited by the Board of Engineers Malaysia

The Engineering Degrees of these universities are accredited by the Board of Engineers Malaysia (BEM) which is a signatory to the Washington Accord. This accreditation ensures that Engineering Graduates will have the following benefits in countries who are signatories of the Washington Accord:

  • Opportunities to register as a Graduate Engineer with Board of Engineers Malaysia (BEM) or the relevant professional bodies in other countries who are signatories under the Washington Accord.
  • Pathways to becoming a Professional or Chartered Engineer.
  • Assurance that graduates are considered as having met international academic standards for engineering practice.

Year 1 Electrical and Electronic Engineering Degree subjects at UCSI University

Power, machine & control engineering lab at UCSI University

Power, machine & control engineering lab at UCSI University

  • Calculus & Analytical Geometry II
  • Circuit Theory I *
  • Digital Electronics I *
  • Analogue Electronic I *
  • Mathematical Methods for Engineers I
  • Technical Communication
  • Electromagnetic Theory I *
  • Electronic Laboratory 1A
  • Electronic Laboratory 1B

Year 2 Electrical and Electronic Engineering Degree subjects at UCSI University

Robotic PLC Micro-Processor Lab for engineering students at UCSI University

Robotic PLC Micro-Processor Lab for engineering students at UCSI University

  • Advanced Circuit Theory &TL *
  • Engineering Design *
  • Mathematical Methods for Engineers II
  • Electronic Manufacturing Industry *
  • Engineering Softwares & Applications *
  • Electrical Power *
  • Computing for Engineers *
  • Co-operative Placement 2
  • Analogue Electronics II *
  • Digital Electronics II *
  • Electronic Laboratory 2A
  • Electronic Laboratory 2B

Year 3 Electrical and Electronic Engineering Degree subjects at UCSI University

Robotic PLC Micro-Processor Lab for engineering students at UCSI University

Robotic PLC Micro-Processor Lab for engineering students at UCSI University

  • Communication Theory *
  • Numerical Analysis
  • Instrumentation & Measurement *
  • Data Communication &Networks *
  • Microprocessor Systems *
  • Electrical Machines *
  • Environmental Engineering and Abatement Processes”
  • Control Systems *
  • Engineering & Management & Economics
  • Engineers in Society
  • Energy Conversion & High Voltage Power Transmission*
  • Electronic Laboratory 3A
  • Electrical Laboratory 3B
  • Electrical Laboratory 3C

Year 4 Electrical and Electronic Engineering Degree subjects at UCSI University

  • Digital Signal processing *

    The engineering programmes at UCSI University are accredited by the Board of Engineers Malaysia and MQA

    The engineering programmes at UCSI University are accredited by the Board of Engineers Malaysia and MQA

  • Digital Systems & HDLs *
  • Electronic Circuit Design
  • Power Electronics *
  • Final Year Project A
  • Embedded Systems Design *
  • Power Systems *
  • Final Year Project B
  • Co-operative Placement 4
  • Power System Protection
  • Electronic Laboratory 4A
  • Electrical Laboratory 4B

Elective :

  • Electromagnetic Theory II
  • Introduction to Production and manufacturing
  • VLSI Design
  • Technopreneurship

Affordable Private University in Malaysia for the Electrical & Electronic Engineering Degree at First City University College

A conducive environment for study at First City University College's library

A conducive environment for study at First City University College’s library

This Bachelor of Electronic Engineering with Honours programme at First City University College equips students with the knowledge that electronic engineers must have. This ranges from essential mathematical concepts to circuitry, control systems, signal processing and electronic system design. The curriculum has been developed and approved by the Board of Engineers, Malaysia (BEM) and Malaysian Qualifications Agency (MQA) which will lead to a professional engineer status.

With 3 credits in SPM in the relevant subjects, you can go for the Diploma in Electronic Engineering or Diploma in Mechatronics Engineering at First City University CollegeAfter the 2.5-year diploma, you can continue on to Year 2 of the Bachelor of Electronic Engineering with Honours programme at First City University College. Alternatively, with 5 credits in SPM or O-Levels including Maths and Physics, students can enter the Foundation in Engineering and Technology for 1 year and then into the 4-year engineering degree.

The Faculty of Engineering and Computing at First City University College provides students with the latest in learning experience through the use of state-of-the-art facilities. Students are inspired and motivated through a hands-on approach in the teaching of engineering and computing.

Why Study Engineering at First City UC?

The engineering labs at First City University College are well-equipped to meet the stringent requirements of MQA

The engineering labs at First City University College are well-equipped to meet the stringent requirements of MQA

  • Students are taught problem-solving skills
  • Attend talks by industry experts
  • Use of advanced software tools such as Mainframe Computing Technology and Mentor Graphics of Electronic Design Automation (EDA)
  • 19 State-of-the-art engineering and computing laboratories

 

Year 1 Subjects for the Bachelor of Electronic Engineering with Honours programme at First City University College

First City University College Final year electrical & electronic engineering student, Yip Chee Hoe, with his project, "DC-DC Step Up Converter for Wind Turbine Application".

First City University College Final year electrical & electronic engineering student, Yip Chee Hoe, with his project, “DC-DC Step Up Converter for Wind Turbine Application”.

  • Engineering Mathematics I
  • Circuit Analysis I
  • Digital Electronics
  • Computer Applications for Engineers
  • Engineering Practice and Communication Skills
  • Engineering Mathematics II
  • Field Theory
  • Electronic Devices and Circuits
  • Electrical Power Technology

Year 2 Subjects for the Bachelor of Electronic Engineering with Honours programme at First City University College

Top notch engineering equipment at First City University College

Top notch engineering equipment at First City University College

  • Engineering Mathematics III
  • Analogue Integrated Circuits Applications
  • Communication Engineering
  • C Programming Techniques
  • Circuit Analysis II
  • Numerical Analysis and Statistics
  • Digital Circuits and Design
  • Instrumentation and Control
  • Microprocessor and Microcontroller Systems
  • Technology and Society

Year 3 Subjects for the Bachelor of Electronic Engineering with Honours programme at First City University College

Top notch engineering equipment at First City University College

Top notch engineering equipment at First City University College

  • Signals and Systems
  • Analogue Systems Design
  • Project Management
  • 3D Modelling
  • Digital Systems Design
  • Control Systems
  • Digital Communications
  • Microcontroller Applications
  • Rich Media Technology
  • Computer Architecture and Organisation

Internship

• Upon completion of Year 3, students are required to undergo 12 weeks of industrial training.

Year 4 Subjects for the Bachelor of Electronic Engineering with Honours programme at First City University College

Experienced and Qualified lecturers provide personal attention to First City University College sudents

Experienced and Qualified lecturers provide personal attention to First City University College sudents

  • Project
  • Digital IC Design
  • Digital Signal Processing
  • # Microwave Engineering
  • # Communication Systems and Networks
  • Project
  • Mobile Communications
  • ## Digital Image Processing
  • ## Optical Communications
  • ** Systems on Silicon
  • ** Analogue Integrated Circuits Design
  • Choose ONE module for electives #, ## and **

Study Bachelor of Engineering (Hons) Electrical & Electronic Engineering at KDU University College Utropolis Glenmarie

KDU University College Utropolis Glenmarie purpose built campus

KDU University College Utropolis Glenmarie purpose built campus

Students after SPM or O-Levels who desire a career as an engineer in Malaysia can join the Foundation in Engineering at KDU University College Utropolis Glenmarie before continuing on to the 4-year Bachelor of Engineering (Hons) Electrical & Electronic Engineering.

Engineering programmes at KDU University College Utropolis Glenmarie are designed to prepare graduates with everything necessary to face the new industrial economy around the globe.

With high quality programmes that adhere to the strict standards set by the Board of Engineers (BEM) Malaysia, students can expect a curriculum that is design-centric and trains them to hone their complex problem-solving skills.

Students will also experience valuable hands-on experience by participating in real-world projects, and have the opportunity to become a research assistant at an undergraduate level through our undergraduate research scheme.

With the goal of ensuring a holistic learning experience, KDU’s programme allows you to cultivate the skills, knowledge, and the ability to develop engineering applications which are required for a wide range of professional engineering careers and expected of leaders in business, engineering, industry and even in R & D.

If you are keen on green energy and the latest smart-grid technology, and envision a career with power utility companies, then you may major in Electrical Power and Renewable Energy in your fourth year.

If your interest lies in advanced digital system design and embedded systems, and if you seek employment with companies like INTEL, Altera and Motorola, opt for Electronic Engineering. Communication Engineering would be your ideal major which focuses on radio frequency and optical communication.

Electrical & Electronic Engineering Degree at KDU University College Utropolis Glenmarie Complies with Board of Engineers Malaysia (BEM)

KDU University College is committed to providing you with high quality programmes that comply with

Mechanical Engineering Lab (Engineering) at KDU University College Utropolis Glenmarie

Mechanical Engineering Lab (Engineering) at KDU University College Utropolis Glenmarie

the standards set by the Board of Engineers, Malaysia (BEM). You can expect a curriculum which is design-centric and that emphasises complex problem-solving skills.

This means you enjoy valuable hands-on experience by participating in a design project during the course. You even have the chance to become a research assistant at undergraduate level through KDU’s undergraduate research scheme.

There is also a twelve-week industrial training session to enhance your employability before you graduate. In short, KDU’s engineering programmes are designed to address the needs of the new industrial economy with the aim of producing engineers who are prepared for the challenges around the globe.

Electrical & Electronics Engineering Lab at KDU University College Utropolis Glenmarie

Electrical & Electronics Engineering Lab at KDU University College Utropolis Glenmarie

According to Dr. Matthew Teow, Head of the School, all of their programmes comply with the standards set by the Board of Engineers Malaysia (BEM), and prospective students can expect a curriculum that is design-centric and which emphasises complex problem-solving skills.

“Furthermore, a faculty is only as good as its staff. Hence, we have also brought together a team of dedicated and talented educators from across the relevant disciplines to promote excellence in the science and practice of engineering,” he added.

Dr. Teow explained as well that his School’s students would undergo a 12-week industrial training stint before they graduate.

This can be conducted with one of the SOE’s many industry partners, such as Maxis, DiGi, Intel, Motorola, Western Digital, Flextronics and Schneider Electric, among others.

“The SOE’s dedication to innovation is another factor that makes us stand out. We are proud to be the first engineering school in Malaysia to have every member of the teaching faculty Level 1 TRIZ-certified,” said Dr. Teow.

Why Study Engineering at KDU University College Utropolis Glenmarie

EXPERT EDUCATORS THAT CONNECT RESEARCH WITH INDUSTRY KNOW-HOW

I was confused about what to study and talking to EduSpiral helped me a lot. Coming from Sarawak made it difficult for me to know which university was best in Malaysia & EduSpiral provided good insights. Eric Lu, Business at KDU University College

I was confused about what to study and talking to EduSpiral helped me a lot. Coming from Sarawak made it difficult for me to know which university was best in Malaysia & EduSpiral provided good insights.
Eric Lu, Business at KDU University College

At KDU, we have an excellent combination of research and industry experience, from academics who are active researchers and industry specialists who provide real-world insights to students.

A ROBUST CURRICULUM WITH EMPHASIS ON MULTIPLE DISCIPLINES AND PROJECT-BASED LEARNING
Students are required to complete engineering projects as part of their studies, equipping them with skills to solve complex, real-world problems. Our engineering curriculum also emphasises on the development of transferable soft skills to allow graduates to work across different job landscapes.

STRONG INDUSTRY LINKAGES
KDU’s Industry Advisory Board is made up of industry professionals, professional engineers and technopreneurs, who provide valuable industry insights to enhance our curriculum and students’ learning. Internships are compulsory in all our degree programmes, enabling students to apply their learning in realistic situations.

Bachelor of Engineering (Hons) inElectrical & Electronic Engineering Subjects at KDU University College Utropolis Glenmarie

KDU’s degree programme in electrical and electronic engineering allows students to cultivate the skills,

Library at KDU University College

Library at KDU University College

knowledge and ability to develop engineering applications required for a wide range of professional engineering careers and expected of leaders in business, engineering, industrial and R&D.

Electrical & Electronic Engineering Degree students are given a choice of 3 majors to choose from in their fourth year

  • Electrical Power and Renewable Energy
    Focuses on harnessing green energy and developing the latest smart-grid technology
  • Electronic Engineering
    Emphasises on advanced digital system design and embedded systems
  • Communication Engineering
    Focuses on radio frequency and optical communication

Year 1 Subjects for the Electrical & Electronic Engineering Degree Course at KDU University College Utropolis Glenmarie

Lecture Hall at KDU University College

Lecture Hall at KDU University College

  • Analogue Electronics
  • Circuit Theory
  • Computer Programming for Engineers
  • Digital Electronics
  • Engineering CAD
  • Engineering Mathematics 1 & 2
  • Introduction to Information Technology
  • Introduction to Communication Systems
  • Physics for Engineers

Year 2 Subjects for the Electrical & Electronic Engineering Degree Course at KDU University College Utropolis Glenmarie

KDU University College Utropolis Glenmarie Campus Accommodation Block (White) is just next to the main block

KDU University College Utropolis Glenmarie Campus Accommodation Block (White) is just next to the main block

  • Circuit Theory & Analysis
  • Corporate Social Responsibility
  • Electromagnetic Field Theory & Applications
  • Engineering Ethics & Practice
  • Engineering Mathematics 3
  • Engineering Probability & Statistics
  • Object Oriented Programming
  • Principles of Electric Machines
  • Process Control & Instrumentation
  • Principles of Microcontroller Systems
  • Research & Experimental Methods

Year 3 Subjects for the Electrical & Electronic Engineering Degree Course at KDU University College Utropolis Glenmarie

KDU University College Utropolis Glenmarie Campus Accommodation

KDU University College Utropolis Glenmarie Campus Accommodation

  • Advanced Electronics
  • Capstone Project
  • Computer Networks
  • Digital Communication
  • Electric Machines & Drive Systems
  • Entrepreneurship
  • Industrial Practice & Safety
  • Microcontroller System Design
  • Modern Control Systems
  • Power Electronics
  • Power System Analysis
  • Signals and Systems
  • Industrial Training

Year 4 Subjects for the Electrical & Electronic Engineering Degree Course at KDU University College Utropolis Glenmarie

EduSpiral analysed my personality and results, subsequently advised me on choosing the right course as well as the best university that fit me. John Lai Wai Hong, Diploma in Mass Comm at KDU University College

EduSpiral analysed my personality and results, subsequently advised me on choosing the right course as well as the best university that fit me.
John Lai Wai Hong, Diploma in Mass Comm at KDU University College

  • Final Year Project 1 & 2

Choose one from three Technical Specialisation

1. Electrical Power & Renewable Energy

  • Advanced Power System Analysis
  • Electrical Energy Utilisation
  • Energy Storage
  • Power Station & High Voltage Engineering
  • Power System Protection
  • Renewable Energy Systems
  • Sustainable Power Generation
  • Transmission & Distribution

2. Electronic Engineering

  • Advanced Digital Design with HDL
  • Digital Signal Processing
  • Fault Diagnosis of Integrated Circuits
  • Introduction to Opto-Electronic Devices
  • MEMS Sensors and Actuators
  • Mixed Signals Circuit Design
  • Real Time Embedded Systems
  • VLSI

3. Communication Engineering

  • Digital Signal Processing
  • Internet Protocol for Mobile Network
  • Introduction to Opto-Electronic Devices
  • Mixed Signals Circuit Design
  • Optical Communication
  • Radio Communication System
  • RF System Design
  • Satellite Communication

What is the Board of Engineers Malaysia (BEM)?

I contacted EduSpiral to find out which UK branch university campus would be best for my son. EduSpiral advised me on WhatsApp & Phone calls providing facts & evidence on the university rankings & course details. He arranged for us to visit the campus as we were from Johor. (Mrs. Mah) Chee Yuan, Chemical Engineering at Heriot-Watt University Malaysia

I contacted EduSpiral to find out which UK branch university campus would be best for my son. EduSpiral advised me on WhatsApp & Phone calls providing facts & evidence on the university rankings & course details. He arranged for us to visit the campus as we were from Johor. (Mrs. Mah)
Chee Yuan, Chemical Engineering at Heriot-Watt University Malaysia

The Board of Engineers Malaysia (BEM) registers graduates and professional engineers under the Registration of Engineers Act 1967 (Revised 2002). The requirement for registration as a graduate engineer is a degree in engineering recognised by the Board. Board of Engineers Malaysia (BEM) is the only body certifying Professional Engineers in Malaysia.

This regulatory body for engineering practices in Malaysia was set-up by the Malaysian government under the Registration of Engineers Act (1967) to administer and to enforce the Engineering Act and its provisions to protect public interest.

Only Graduate Engineers and Professional Engineers registered with the Board of Engineers, Malaysia (BEM) are entitled to practice engineering in Malaysia.  All engineering practitioner MUST register with BEM within 6-months of practice.

A professional engineer (Ir or PEng) is a person who is licensed to practice to practice engineering in Malaysia after meeting all requirements of the  (e.g. pass PI Examination).

The Education Pathway to be a Professional Engineer in Malaysia after completing a 4-Year Engineering Degree that’s Accredited by the Board of Engineers Malaysia

The recognized academic qualification for registration as a Graduate Engineer with BEM includes the as a Graduate Graduate

"EdusSpiral counseled me through Facebook providing valuable information and advise. My application to Curtin University Sarawak went smoothly." Kai Chun, Chemical Engineering at Curtin Sarawak

“EdusSpiral counseled me through Facebook providing valuable information and advise. My application to Curtin University Sarawak went smoothly.”
Kai Chun, Chemical Engineering at Curtin Sarawak

Engineer Engineer with the Board of Engineers Malaysia (BEM) includes includes the following:

  • An engineering degree accredited/recognized by the Board of Engineers Malaysia (BEM) available in an approved list maintained by BEM
  • A pass in Part I & part II of the Engineering Council Examination of United Kingdom or Part I & Part II of the IEM/BEM Graduate Examination in any particular branch for qualifications that is not branch for qualifications qualifications that is not accredited/recognized by BEM/IEM.
  • An engineer who has just graduated with a recognised qualification must register with the Board of Engineers Malaysia. He/she can then start to obtain the necessary training and experience, normally four years, before he/she can attempt to sit for the Professional Interview, an exam to qualify Graduate Members of IEM to be transferred to Corporate Members. Corporate Members of Institution of Engineers, Malaysia (IEM) can then apply to upgrade their status to P.Eng. with the Board of Engineers Malaysia.
Asia Pacific University (APU) is ranked Tier 5 or "Excellent" in the SETARA 2013 rating by MQA. APU is now operating at its new iconic campus at Technology Park Malaysia, Kuala Lumpur.

Asia Pacific University (APU) is ranked Tier 5 or “Excellent” in the SETARA 2013 rating by MQA. APU is now operating at its new iconic campus at Technology Park Malaysia, Kuala Lumpur.

After graduation, an engineer needs to register with Board of Engineers Malaysia to be a graduate engineer. After a few years of practical experience (supervised by a professional engineer), the graduate engineer can apply to sit for Professional Interview (with IEM). If he/she passes the Interview, he/she can apply to Board of Engineers Malaysia (BEM) to be a Professional Engineer that entitles him/her to use the title Ir.

  • Engineers Act 1967 requires every engineer to be registered with the Board of Engineers, Malaysia (BEM).
  • Graduates from recognised degree programmes shall be registered as Graduate Engineer to work as an engineer.
  • Practical training of more than 3 years is required for application to sit for Professional Interview (PI).
  • A PI candidate will be required to show that he can apply theory in engineering projects, and has acquired the skills of investigation, planning, and design.
  • Upon passing the PI, the candidate can then apply to BEM for registration as a Professional Engineer.

Why become a professional engineer in Malaysia?

I contacted EduSpiral to find out which UK branch university campus would be best for my son. EduSpiral advised me on WhatsApp & Phone calls providing facts & evidence on the university rankings & course details. He arranged for us to visit the campus as we were from Johor. (Mrs. Mah) Chee Yuan, Chemical Engineering at Heriot-Watt University Malaysia

I contacted EduSpiral to find out which UK branch university campus would be best for my son. EduSpiral advised me on WhatsApp & Phone calls providing facts & evidence on the university rankings & course details. He arranged for us to visit the campus as we were from Johor. (Mrs. Mah)
Chee Yuan, Chemical Engineering at Heriot-Watt University Malaysia

  1. If you ever want or need to become a consulting, engineer, you must be licensed as an Ir or P.Eng.
  2. Only a Ir/P.Eng. can sign and seal engineering documents that are engineering documents that are submitted to a public authority or for public and private clients.
  3. Many companies encourage licensure and some even pay a bonus for becoming a P.Eng.
  4. In education, more universities are requiring a Ir/P.Eng. license to lecture in the engineering faculty or for holding certain positions.
  5. In some industries such as utilities, and government positions, a P.Eng. is required for specified jobs or positions.
  6. With the engineering profession now operating in an international environment, licensing may be required to work in or for other countries. You will be prepared in the event your career moves in this direction (e.g. APEC Engineers, EMF Int. Engineer Register, Washington Accord)

What is the the Washington Accord?

The Washington Accord is a multinational agreement signed in 1989, which recognises the substantial

Get a top ranked UK degree in Malaysia at Heriot-Watt University Malaysia

Get a top ranked UK degree in Malaysia at Heriot-Watt University Malaysia

equivalency of engineering degree programmes accredited by the responsible bodies in each of the signatory countries such as the Board of Engineers Malaysia (BEM).

Washington Accord is an agreement among the engineering quality assurance organisations of several nations that recognises the substantial equivalency of programs accredited by those organisations.

The agreement paves the way for mutual recognition of accredited programmes, establishing the notion that graduates have met the academic requirements for entry to the practice of engineering in any signatory country.

Signatories have full rights of participation in the Accord; qualifications accredited or recognised by other signatories are recognised by each signatory as being substantially equivalent to accredited or recognised qualifications within its own jurisdiction.

Admission to the Accord is more importantly an endorsement that the engineering education system of the member nation has demonstrated a strong, longterm commitment to quality assurance in producing engineers ready for industry practice in the international scene.

As a Washington Accord signatory, Malaysia’s degrees that have been accredited by Engineering Accreditation Council (EAC)

I met EduSpiral at the Education Fair and he helped me to filter all the information from the universities and choose the best university that fit me." Vincent Hoy, Scholarship student at Asia Pacific University

I met EduSpiral at the Education Fair and he helped me to filter all the information from the universities and choose the best university that fit me.”
Vincent Hoy, Scholarship student at Asia Pacific University

will be accepted by other Washington Accord signatories.

This means that students who study in universities with engineering degrees that are accredited by MQA and Board of Engineers Malaysia (BEM) may find work in other countries that have signed the Washington Accord.

Board of Engineers Malaysia (BEM) uses as a guide the list for Professional/Chartered Engineer by the accreditation organisations of the country where the degree is issued.

Candidates are advised to check with the relevant Engineering Accreditation bodies’ web site for the list recognised degrees of professional chartered level.

However, Board of Engineers Malaysia (BEM) reserves the right to review the list at any time without notice.

Accredited Professional Engineers in Malaysia can work globally because of the Washington Accord

In 2007, Malaysia became a member of The Washington Accord, which recognises experienced professional engineers

After explaining in detail, EduSpiral took me & my parents to tour the campus & helped with the scholarship application. Darren Fong, Engineering at Asia Pacific University

After explaining in detail, EduSpiral took me & my parents to tour the campus & helped with the scholarship application.
Darren Fong, Engineering at Asia Pacific University

represented by responsible bodies. The Washington Accord is a small group of signatories that have agreed to mutually recognise accredited engineering programmes.

Members of The Washington Accord are Hong Kong, South Africa, Japan, Singapore, USA, Canada, New Zealand, Australia, UK, Ireland, Taipei, Korea, Malaysia and Turkey.

The Board of Engineers Malaysia (BEM), The Institution of Engineers Malaysia (IEM) and Association of Consulting Engineers Malaysia (ACEM) develop and use the EMF Register as a secure benchmark that allows a professional engineer to be recognised or exempted from licensing or registration in other countries (other than that in which they first gained recognition).

Eligibility for admission to EMF International Register of Professional Engineers Register is limited only to engineers who have completed an accredited or recognised engineering programme, registered with the Board of Engineers Malaysia (BEM) and is a corporate member of the IEM who is capable of independent practice.

To qualify for admission to EMF International Register of Professional Engineers Register, a candidate must be:

  • A Professional Engineer registered with the Board of Engineers Malaysia (BEM) and/or a Corporate Member with the Institution of Engineers Malaysia;
  • Seven years experience after graduation in a recognised engineering discipline;
  • Two years experience in responsible charge of significant work (may be obtained within the seven years experience)
  • Maintained their continuing professional development at a satisfactory level.

EduSpiral Consultant Services- Your Personal Online Education Advisor

Established since 2009, EduSpiral Consultant Services helps provide information and counselling on courses and universities in Malaysia.

After chatting with EduSpiral on Facebook, I got a clearer picture of which university to choose that would best fit me. Zhi Sheng, Heriot-Watt University Malaysia

After chatting with EduSpiral on Facebook, I got a clearer picture of which university to choose that would best fit me.
Zhi Sheng, Heriot-Watt University Malaysia

EduSpiral Consultant Services represents the best colleges and universities in Malaysia offering a wide range of choices for students to choose from. These colleges and universities offer value for money in the quality of education and excellent facilities that you get.

These universities and colleges are chosen by EduSpiral because they represent the best in their fields in Malaysia and affordable. EduSpiral provides in-depth information and counseling on their courses so that students are able to make the right choice.

If you are still not sure what to study, please contact us and we will send you a free EduSpiral Career Assessment Form.

Please contact us for more details.

Please fill up the form for more information. If you do not give your mobile number or full name as in IC, your query will not be answered. Please make sure you give a correct email address and check your email including the SPAM or JUNK email folder within 48 hours as we will email you the information. 

About EduSpiral Consultant Services

EduSpiral seeks to offer information and advise on courses & careers and placement services to top private colleges & universities in Malaysia & Singapore. Our experienced consultants will share from years of counselling students to guide students personally on to the best possible career choice. The decision that you make now, can change your life forever....so make it wisely.

Posted on February 13, 2017, in Best University, Board of Engineers Malaysia (BEM), Choosing the right course, Choosing the right university, Electronic Engineering, Engineering, Study in Malaysia, Top Universities and tagged , , , , , , , , , , , , . Bookmark the permalink. Leave a comment.

Please tell us what you think or leave your question here and we will answer you asap

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: