Best Electrical & Electronic Engineering Courses at Top Universities in Malaysia


Study Bachelor of Engineering (Hons) Electrical & Electronic Accredited by Board of Engineers Malaysia (BEM) at Top Private Universities

Written by EduSpiral Consultant Services For more information contact 01111408838

Electrical & Electronic Engineering would be a good course to go for because there is a shortage of them in Malaysia. If students want to become a consultant later on, they should choose a university where the engineering degree is accredited by the Board of Engineers Malaysia (BEM).

In a report conducted by IPSOS Business Consulting in 2012 on the E&E Sector Study on the Supply-Demand of Talent in Malaysia, it is found that there is a shortage of Electrical & Electronic Engineers in Malaysia. The E&E sector is an important contributor to Malaysia’s economy as it is one of the 12 National Key Economic Areas (NKEA) in the country’s Economic Transformation Programme (ETP).

In order to have a successful career as an electrical & electronics engineer, students after SPM, O-Levels, UEC, A-Levels or STPM must choose to study at the best private universities in Malaysia that’s accredited by MQA and the Board of Engineers Malaysia (BEM).

Students after SPM or O-Levels may go for the Foundation in Engineering at top private universities in Malaysia for 1 year before continuing on to the 4-year Electrical & Electronic Engineering degree. With 3 credits in SPM or O-Levels including Maths & Science, students may go for the 2-year Diploma in Electrical & Electronic Engineering and then enter into Year 2 of the Engineering degree. Pre-University students with the relevant results in STPM, A-Levels, SAM, CPU, AUSMAT, etc. can enter directly into Year 1 of the engineering degree.

For more information contact 01111408838

Please fill up the form for more information. If you do not give your mobile number or full name as in IC, your query will not be answered. Please make sure you give a correct email address and check your email including the SPAM or JUNK email folder within 48 hours as we will email you the information. 

High Job Demand for Qualified Electrical & Electronic Engineers from Top Private Universities in Malaysia

My friend introduced me to EduSpiral. He gave me all the information on WhatsApp & helped me to apply. Chong Keat, Electrical & Electronic Engineering at Heriot-Watt University Malaysia

My friend introduced me to EduSpiral. He gave me all the information on WhatsApp & helped me to apply.
Chong Keat, Electrical & Electronic Engineering at Heriot-Watt University Malaysia

There are 1,900 active E&E companies which provide employment to over 350,000 people. In line with ETP projections, Malaysia’s E&E sector growth is expected to be robust in the coming years. This growth will require a steady supply of skilled talent, both in numbers and in the appropriate skills-sets, to meet the present and future needs of the sector.

This gap is due to several factors that includes competition from other sectors and economies for the same talent pool, as well as the un-employability of graduates that reduces the pool of addressable talent

The sector also faces a situation of skills gaps, where adequately trained and skilled talent, both at entry and experienced levels are lacking. These are mainly in the areas of R&D and to some extent Engineering Support.

Final Year Engineering Students' Projects at Curtin University Sarawak

Final Year Engineering Students’ Projects at Curtin University Sarawak

The report found that Fresh Graduates or Entry-level Talent Not Industry-Ready (lacks required skill-sets) therefore it is

important for students to choose a university that is able to provide the necessary training and possess the experience to teach.

  • University’s curriculum do not meet specific industry needs
  • Graduates lack relevant industry exposure
  • Graduates do not have the required soft skills demanded by the industry
  • Curriculum / students do not fully embrace the importance of soft skills.
  • It is also reported in the Star newspaper that Communication Skills is the no. 1 soft skill employers look for and that graduates with good command of the English language obtain a 25% higher salary and increased opportunities for promotion.

 

Electrical & Electronic Engineers in demand in Malaysia

The engineering programmes at UCSI University are accredited by the Board of Engineers Malaysia and MQA

The engineering programmes at UCSI University are accredited by the Board of Engineers Malaysia and MQA

The  IPSOS report identified eight key talent shortage areas in the E&E field and the areas in demand for E&E fresh graduates are found in 5 areas which are:

  1. IC Design Engineers with a Degree in Electrical & Electronic with emphasis in IC Design / Microelectronics. They are involved in the design of Integrated Circuits e.g. implement and integrate IC layout design for digital and analog circuit, perform thorough verifications on layout designs using industry leading EDA tools.
  2. The IC Design Engineer must have knowledge and skills in hardware specification, analysis, logic design, modeling, simulation, verification, synthesis, test and maintenance of integrated circuits. They should be able to understand design from a system-level perspective. They are mainly employed in around 20 IC design companies in Malaysia such as Intel, Altera, ICMiC, Ssymmid etc.
  3. Embedded System / Firmware Engineer with a degree in Computer Engineering or E&E. They Create and implement algorithms which enable the hardware to function. They must be proficient in C/C++, assembly programming and debugging skills in embedded systems. Experience in Device Driver development for embedded systems and a strong mixed background in software and hardware engineering.  Embedded/ Firmware engineers are mainly employed in companies that designs or supports embedded system / firmware enabled devices e.g. Finisar, Pradotec, Western Digital
  4. Software Engineer with a degree in Software Engineering or E&E Engineering. Software Engineers in the E&E field will
    KDU College Penang students have access to top notch engineering faciltiies

    KDU College Penang students have access to top notch engineering faciltiies

    design and develop the many types of software for product and engineering support (e.g. automation, testing equipment). They should be familiar with specialized languages relevant to the technologies employed (e.g. Machine Language, Assembly Language, C,C++, Java) and be proficient in Software Product Life Cycle and familiar with software testing methodology at system/board level.Software Engineers find work where navigational, measuring control instruments etc. are manufactured and/or designed in-house e.g. Altera, Philips Lumileds, NEC Corporation etc.

  5. Radio Frequency (RF) Engineers with a degree in E&E Engineering or Telecommunications Engineering. They are responsible for the analysis, design, implementation, optimization and enhancement of wireless telecommunications products and networks. They should be able to understand electronic hardware design, circuit board material, antenna radiation, and the effect of interfering frequencies that prevent optimum performance within the piece of equipment being developed.  RF Engineers are also required where there are RF Technology employed e.g. Chip Design and Wafer Fabrication.RF Engineers are mainly employed in companies with that designs and manufactures devices which operate in the Radio Frequency spectrum (e.g. Cell Phones, Wi-Fi and Public Safety Solutions) e.g. Motorolla, Agilent, National Instruments

    KBU International College Final year electrical & electronic engineering student, Yip Chee Hoe, with his project,

    KBU International College Final year electrical & electronic engineering student, Yip Chee Hoe, with his project, “DC-DC Step Up Converter for Wind Turbine Application”.

  6. Product Design R&D Engineers with a degree in Mechanical Engineering or E&E Engineering. They must have experience in product development of metal, plastic, mechanical , electrical and electronics parts/products. It is important to be familiar with product development tools e.g. DFMEA, CAD designing tool. They can find work in companies like Bosch, Dyson, Motorola.

E&E graduates can find jobs at companies such as:

  • Flextronics
  • Agilent
  • Finisar
  • Altera
  • Philips Lumileds
  • NEC Corporation
  • Siltera
  • Intel
  • Infineon

Electrical & Electronics (E&E) Industry in Malaysia needs Top Qualified Engineers

Electrical & Electronics (E&E) is a major industry of Malaysia, which has grown by leaps and bounds since 1972. The total E&E

Curtin University Sarawak is a top ranking university in Malaysia with a 300-acre campus

Curtin University Sarawak is a top ranking university in Malaysia with a 300-acre campus

export for 2012 was RM256.4 billion which represents 36.5% of Malaysia’s total exports and 59.3% of total manufacturing exports.

The E&E industry employs about 700,000 people of whom 30 to 40 percent are engineers and managers. Meanwhile, foreign direct investments (FDIs) continue to grow while Design & Development (D&D) and business process operations/services have also grown significantly.

In terms of talent development, the government has taken the inputs of the industry into account. They are encouraging more scientists and engineers to study Masters and Doctorates through MyMSc and MyPhD programmes. The Northern Corridor Implementation Authority (NCIA) has set up the Centre of Excellence (CoE) for Microelectronics operated by USAINS Infotech Sdn. Bhd. At this E&E CoE, talents are being trained for microelectronic design.

However, the above will take time and it is still not sufficient to support the industry now and in the future. We need to provide quality education from primary to secondary. The university standards need to be improved.

The command of the English language is important and must be improved. Last but not least, we need to encourage more students to study science and engineering as the number of students studying these two subjects has decreased from more than 60% to currently at around 30%.

Structure of the E&E Industry Sectors

Electrical – Electrical Panels and Consoles, Switching Apparatus, lamps, air conditioners, vacuum cleaners, ovens,

KDU College Penang Campus is strategically located in the city area

KDU College Penang Campus is strategically located in the city area

transformers, cables & wires, primary cells & batteries, solar cells and modules.

Electronics – Components Semiconductors, passive components, printed circuit boards, metal stamped parts and precision plastic parts.

Consumer – Audio visual products such as television receivers, portable multimedia players (PMP), speakers, cameras and electronic games.

Industrial – Multimedia and information technology products such as computers and computer peripherals, telecommunications equipment and office equipment. Source: MIDA Reports (www.mida.com.my accessed on Jan. 22nd 2010.

Where to study Electrical & Electronic Engineering in Malaysia

Global Trends and its Talent Implications for Malaysia’s E&E Industry will require a talent pool which is highly skilled,

competitive.  The IPSOS reported that talent supply from Institutions of Higher Learning are not industry-ready. The current university education does not provide workplace ready and able talent.

Six months to one year of additional on-the-job experience is typically required until graduates are considered viable.

Study at the Best Private Universities in Malaysia for Electrical & Electronic Engineering that’s Accredited by the Board of Engineers Malaysia

In order to succeed as an Electrical & Electronic Engineer in Malaysia, students should choose the best private universities in

School of Engineering & Science at Curtin University Sarawak

School of Engineering & Science at Curtin University Sarawak

Malaysia to study Electrical & Electronic Engineering so that you can gain the necessary knowledge and skills. Students after SPM or UEC, should visit the universities’ campuses to look at the facilities and talk to the lecturers to gauge their experience.

The Electrical & Electronic Engineering degrees at the top private universities in Malaysia should be accredited by MQA and also the Board of Engineers Malaysia (BEM).

The Engineering Degrees of these universities are accredited by the Board of Engineers Malaysia (BEM) which is a signatory to the Washington Accord. This accreditation ensures that Engineering Graduates will have the following benefits in countries who are signatories of the Washington Accord:

  • Opportunities to register as a Graduate Engineer with Board of Engineers Malaysia (BEM) or the relevant professional bodies in other countries who are signatories under the Washington Accord.
  • Pathways to becoming a Professional or Chartered Engineer.
  • Assurance that graduates are considered as having met international academic standards for engineering practice.
Heriot-Watt University Malaysia is a top ranking UK university for Engineering

Heriot-Watt University Malaysia is a top ranking UK university for Engineering

Other than the academic quality of the universities, students must seriously consider the student environment. Research has shown that employers have rejected 56% of job interviewees because of the lack of skill in the English language.

Graduates with a strong command of the English language have also been found to earn 25% higher salaries and have faster promotions in their jobs. Therefore, in order to succeed, students should choose a private university with an English-speaking student environment to enhance their career competitiveness.

You may save a few thousand by going to a cheaper university with a non-English speaking environment, but remember, you will be getting 25% lower salary and slower promotion for the next 50 years of your work life.

Education Pathway after SPM or O-Levels to a Top Electrical & Electronic Engineering Degree in Malaysia

What is the Board of Engineers Malaysia (BEM)?

I contacted EduSpiral to find out which UK branch university campus would be best for my son. EduSpiral advised me on WhatsApp & Phone calls providing facts & evidence on the university rankings & course details. He arranged for us to visit the campus as we were from Johor. (Mrs. Mah) Chee Yuan, Chemical Engineering at Heriot-Watt University Malaysia

I contacted EduSpiral to find out which UK branch university campus would be best for my son. EduSpiral advised me on WhatsApp & Phone calls providing facts & evidence on the university rankings & course details. He arranged for us to visit the campus as we were from Johor. (Mrs. Mah)
Chee Yuan, Chemical Engineering at Heriot-Watt University Malaysia

The Board of Engineers Malaysia (BEM) registers graduates and professional engineers under the Registration of Engineers Act 1967 (Revised 2002). The requirement for registration as a graduate engineer is a degree in engineering recognised by the Board. Board of Engineers Malaysia (BEM) is the only body certifying Professional Engineers in Malaysia.

This regulatory body for engineering practices in Malaysia was set-up by the Malaysian government under the Registration of Engineers Act (1967) to administer and to enforce the Engineering Act and its provisions to protect public interest.

Only Graduate Engineers and Professional Engineers registered with the Board of Engineers, Malaysia (BEM) are entitled to practice engineering in Malaysia.  All engineering practitioner MUST register with BEM within 6-months of practice.

A professional engineer (Ir or PEng) is a person who is licensed to practice to practice engineering in Malaysia after meeting all requirements of the  (e.g. pass PI Examination).

The Education Pathway to be a Professional Engineer in Malaysia after completing a 4-Year Engineering Degree that’s Accredited by the Board of Engineers Malaysia

The recognized academic qualification for registration as a Graduate Engineer with BEM includes the as a Graduate Graduate

"EdusSpiral counseled me through Facebook providing valuable information and advise. My application to Curtin University Sarawak went smoothly." Kai Chun, Chemical Engineering at Curtin Sarawak

“EdusSpiral counseled me through Facebook providing valuable information and advise. My application to Curtin University Sarawak went smoothly.”
Kai Chun, Chemical Engineering at Curtin Sarawak

Engineer Engineer with the Board of Engineers Malaysia (BEM) includes includes the following:

  • An engineering degree accredited/recognized by the Board of Engineers Malaysia (BEM) available in an approved list maintained by BEM
  • A pass in Part I & part II of the Engineering Council Examination of United Kingdom or Part I & Part II of the IEM/BEM Graduate Examination in any particular branch for qualifications that is not branch for qualifications qualifications that is not accredited/recognized by BEM/IEM.
  • An engineer who has just graduated with a recognised qualification must register with the Board of Engineers Malaysia. He/she can then start to obtain the necessary training and experience, normally four years, before he/she can attempt to sit for the Professional Interview, an exam to qualify Graduate Members of IEM to be transferred to Corporate Members. Corporate Members of Institution of Engineers, Malaysia (IEM) can then apply to upgrade their status to P.Eng. with the Board of Engineers Malaysia.
Asia Pacific University (APU) is ranked Tier 5 or "Excellent" in the SETARA 2013 rating by MQA. APU is now operating at its new iconic campus at Technology Park Malaysia, Kuala Lumpur.

Asia Pacific University (APU) is ranked Tier 5 or “Excellent” in the SETARA 2013 rating by MQA. APU is now operating at its new iconic campus at Technology Park Malaysia, Kuala Lumpur.

After graduation, an engineer needs to register with Board of Engineers Malaysia to be a graduate engineer. After a few years of practical experience (supervised by a professional engineer), the graduate engineer can apply to sit for Professional Interview (with IEM). If he/she passes the Interview, he/she can apply to Board of Engineers Malaysia (BEM) to be a Professional Engineer that entitles him/her to use the title Ir.

  • Engineers Act 1967 requires every engineer to be registered with the Board of Engineers, Malaysia (BEM).
  • Graduates from recognised degree programmes shall be registered as Graduate Engineer to work as an engineer.
  • Practical training of more than 3 years is required for application to sit for Professional Interview (PI).
  • A PI candidate will be required to show that he can apply theory in engineering projects, and has acquired the skills of investigation, planning, and design.
  • Upon passing the PI, the candidate can then apply to BEM for registration as a Professional Engineer.

Why become a professional engineer in Malaysia?

I contacted EduSpiral to find out which UK branch university campus would be best for my son. EduSpiral advised me on WhatsApp & Phone calls providing facts & evidence on the university rankings & course details. He arranged for us to visit the campus as we were from Johor. (Mrs. Mah) Chee Yuan, Chemical Engineering at Heriot-Watt University Malaysia

I contacted EduSpiral to find out which UK branch university campus would be best for my son. EduSpiral advised me on WhatsApp & Phone calls providing facts & evidence on the university rankings & course details. He arranged for us to visit the campus as we were from Johor. (Mrs. Mah)
Chee Yuan, Chemical Engineering at Heriot-Watt University Malaysia

  1. If you ever want or need to become a consulting, engineer, you must be licensed as an Ir or P.Eng.
  2. Only a Ir/P.Eng. can sign and seal engineering documents that are engineering documents that are submitted to a public authority or for public and private clients.
  3. Many companies encourage licensure and some even pay a bonus for becoming a P.Eng.
  4. In education, more universities are requiring a Ir/P.Eng. license to lecture in the engineering faculty or for holding certain positions.
  5. In some industries such as utilities, and government positions, a P.Eng. is required for specified jobs or positions.
  6. With the engineering profession now operating in an international environment, licensing may be required to work in or for other countries. You will be prepared in the event your career moves in this direction (e.g. APEC Engineers, EMF Int. Engineer Register, Washington Accord)

What is the the Washington Accord?

The Washington Accord is a multinational agreement signed in 1989, which recognises the substantial

Get a top ranked UK degree in Malaysia at Heriot-Watt University Malaysia

Get a top ranked UK degree in Malaysia at Heriot-Watt University Malaysia

equivalency of engineering degree programmes accredited by the responsible bodies in each of the signatory countries such as the Board of Engineers Malaysia (BEM).

Washington Accord is an agreement among the engineering quality assurance organisations of several nations that recognises the substantial equivalency of programs accredited by those organisations.

The agreement paves the way for mutual recognition of accredited programmes, establishing the notion that graduates have met the academic requirements for entry to the practice of engineering in any signatory country.

Signatories have full rights of participation in the Accord; qualifications accredited or recognised by other signatories are recognised by each signatory as being substantially equivalent to accredited or recognised qualifications within its own jurisdiction.

Admission to the Accord is more importantly an endorsement that the engineering education system of the member nation has demonstrated a strong, longterm commitment to quality assurance in producing engineers ready for industry practice in the international scene.

As a Washington Accord signatory, Malaysia’s degrees that have been accredited by Engineering Accreditation Council (EAC)

I met EduSpiral at the Education Fair and he helped me to filter all the information from the universities and choose the best university that fit me." Vincent Hoy, Scholarship student at Asia Pacific University

I met EduSpiral at the Education Fair and he helped me to filter all the information from the universities and choose the best university that fit me.”
Vincent Hoy, Scholarship student at Asia Pacific University

will be accepted by other Washington Accord signatories.

This means that students who study in universities with engineering degrees that are accredited by MQA and Board of Engineers Malaysia (BEM) may find work in other countries that have signed the Washington Accord.

Board of Engineers Malaysia (BEM) uses as a guide the list for Professional/Chartered Engineer by the accreditation organisations of the country where the degree is issued.

Candidates are advised to check with the relevant Engineering Accreditation bodies’ web site for the list recognised degrees of professional chartered level.

However, Board of Engineers Malaysia (BEM) reserves the right to review the list at any time without notice.

Accredited Professional Engineers in Malaysia can work globally because of the Washington Accord

In 2007, Malaysia became a member of The Washington Accord, which recognises experienced professional engineers

After explaining in detail, EduSpiral took me & my parents to tour the campus & helped with the scholarship application. Darren Fong, Engineering at Asia Pacific University

After explaining in detail, EduSpiral took me & my parents to tour the campus & helped with the scholarship application.
Darren Fong, Engineering at Asia Pacific University

represented by responsible bodies. The Washington Accord is a small group of signatories that have agreed to mutually recognise accredited engineering programmes.

Members of The Washington Accord are Hong Kong, South Africa, Japan, Singapore, USA, Canada, New Zealand, Australia, UK, Ireland, Taipei, Korea, Malaysia and Turkey.

The Board of Engineers Malaysia (BEM), The Institution of Engineers Malaysia (IEM) and Association of Consulting Engineers Malaysia (ACEM) develop and use the EMF Register as a secure benchmark that allows a professional engineer to be recognised or exempted from licensing or registration in other countries (other than that in which they first gained recognition).

Eligibility for admission to EMF International Register of Professional Engineers Register is limited only to engineers who have completed an accredited or recognised engineering programme, registered with the Board of Engineers Malaysia (BEM) and is a corporate member of the IEM who is capable of independent practice.

To qualify for admission to EMF International Register of Professional Engineers Register, a candidate must be:

  • A Professional Engineer registered with the Board of Engineers Malaysia (BEM) and/or a Corporate Member with the Institution of Engineers Malaysia;
  • Seven years experience after graduation in a recognised engineering discipline;
  • Two years experience in responsible charge of significant work (may be obtained within the seven years experience)
  • Maintained their continuing professional development at a satisfactory level.

EduSpiral Consultant Services- Your Personal Online Education Advisor

Established since 2009, EduSpiral Consultant Services helps provide information and counselling on courses and universities in Malaysia.

After chatting with EduSpiral on Facebook, I got a clearer picture of which university to choose that would best fit me. Zhi Sheng, Heriot-Watt University Malaysia

After chatting with EduSpiral on Facebook, I got a clearer picture of which university to choose that would best fit me.
Zhi Sheng, Heriot-Watt University Malaysia

EduSpiral Consultant Services represents the best colleges and universities in Malaysia offering a wide range of choices for students to choose from. These colleges and universities offer value for money in the quality of education and excellent facilities that you get.

These universities and colleges are chosen by EduSpiral because they represent the best in their fields in Malaysia and affordable. EduSpiral provides in-depth information and counseling on their courses so that students are able to make the right choice.

If you are still not sure what to study, please contact us and we will send you a free EduSpiral Career Assessment Form.

Please contact us for more details.

Please fill up the form for more information. If you do not give your mobile number or full name as in IC, your query will not be answered. Please make sure you give a correct email address and check your email including the SPAM or JUNK email folder within 48 hours as we will email you the information. 

  1. If i take engineering course,my add math must be very good?At least Gred A and B in SPM result?Gred C leh ? can i take take engineering course?

    Like

    • You only need at least 5 credits in SPM including Maths & Physics to join the Foundation leading to the engineering degree. If it is Chemical Engineering, then it would include Chemistry. Engineering is not an easy course so you should have good results in Maths, Physics or Chemistry. For more details, you may email me at info@eduspiral.com.my with your full name and mobile number.

      Like

Please tell us what you think or leave your question here and we will answer you asap

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: