The Best Engineering Courses at First City University College – Accredited by Board of Engineers Malaysia (BEM)

The engineering labs at First City University College are well-equipped to meet the stringent requirements of MQA

The engineering labs at First City University College are well-equipped to meet the stringent requirements of MQA

First City UC Offers Top Rated BEM Accredited Engineering Programmes for Malaysian Students

Engineering degrees that are accredited by the Board of Engineers Malaysia (BEM) are recognised by overseas countries for work. In addition, the 4-year Engineering degree programmes at First City University College are accredited by Board of Engineers Malaysia (BEM) and the Malaysian Qualifications Agency (MQA). The engineering programmes are up-to-date and prepare students to meet the requirements of future technologically advanced work place. Carefully thought out, the engineering programmes offered at First City UC have a future high job demand therefore graduates are assured of job security. Students after secondary school can choose from the Engineering Foundation Pathway or one of 2 Engineering Diplomas before continuing on the to BEM Accredited Engineering degree courses.

The main objective of First City UC is to provide higher education opportunities to young Malaysians and foreign nationals in a wide range of academic and professional fields including engineering. First City University College (First City UC) is a reputable private higher education institution established in 1990 by the First Nationwide Group. Malaysian students have access to affordable and high quality engineering education at the university. First City UC has a purpose-designed, fully equipped campus with sports and recreational facilities, and located on a 13-acre site within Bandar Utama.

Please fill up the Form below and I will WhatsApp you and provide you with sound advise on how to choose the best private university or college in Malaysia to study at. If you do not give your mobile number or full name as in IC, your query will not be answered. Our knowledgeable & experienced counsellor will send you a message on WhatsApp & provide assistance from there.

Why Study Engineering at First City University College?

Established in 1990 by the First Nationwide Group, First City University College has a purpose-designed, fully equipped campus with sports and recreational facilities, and located on a 13-acre site within Bandar Utama
Established in 1990 by the First Nationwide Group, First City University College has a purpose-designed, fully equipped campus with sports and recreational facilities, and located on a 13-acre site within Bandar Utama

The Engineering degree programmes at First City UC are accredited by  Board of Engineers Malaysia (BEM) and also the Malaysian Qualifications Agency (MQA). Furthermore, students have access to 19 State-of-the-art engineering and computing laboratories. They will also have access to advanced software tools such as Mainframe Computing Technology and Mentor Graphics of Electronic Design Automation (EDA).

There are seven Engineering Laboratories, which are well-equipped to meet the stringent requirements of First City University College’s Partner Universities and The Malaysian Qualifications Agency (MQA).

The engineering laboratories include the Digital Power & Control Laboratory, the Microprocessor & Electronic CAD Laboratory, Mechatronics Laboratory and Electronic Design Automation (EDA) Laboratory. The Computer Centre maintains the campus-wide network based on the Windows platform. In the E-Info Lab, students enjoy high speed access to the Internet and its resources.

At First City UC, students will study in a conducive medium-sized 13-acre campus with sports facilities that’s located in the safe township of Bandar Utama in Selangor. Sports enthusiasts can enjoy freedom to practice and play at the Badminton Courts, Football Field, Basketball Court, Volleyball Court or Table Tennis. Additionally, students will have easy access to amenities such as food court, supermarket, bank ATMs, laundromat, etc at the Centre Point Mall across the road from the university.

What are the Engineering Programmes Available at First City University College?

First City University College Final year electrical & electronic engineering student, Yip Chee Hoe, with his project, "DC-DC Step Up Converter for Wind Turbine Application".
First City University College Final year electrical & electronic engineering student, Yip Chee Hoe, with his project, “DC-DC Step Up Converter for Wind Turbine Application”.

The engineering programmes are up-to-date and prepare students to meet the requirements of future technologically advanced work place. Carefully thought out, the engineering programmes offered at First City UC have a future high job demand therefore graduates are assured of job security. Students after secondary school can choose from the Engineering Foundation Pathway or one of 2 Engineering Diplomas before continuing on the to BEM Accredited Engineering degree courses.

What are the Duration of the Engineering Programmes at First City UC?

  • Foundation in Engineering, Science & Technology – 1 year
  • Engineering Diploma – 2 years & 4 months
  • Engineering Degree – 4 years

What is the education Pathway into the Engineering degree programmes at First City UC after SPM or IGCSE/O-Levels?

First City University College engineering students are taught by qualified and experienced lecturers
First City University College engineering students are taught by qualified and experienced lecturers

To enter into the Foundation in Engineering, Science & Technology programme, students after SPM or IGCSE/O-Levels will need at least 5 credits including Maths and Physics (Chemistry for Chemical Engineering) and pass in BM and Sejarah. Alternatively, with 3 credits in SPM or IGCSE/O-Levels including Maths and a Science subject, students can join the Diploma in Engineering course before entering into Year 2 of the Degree course.

Students who have just completed their SPM or IGCSE/O-Levels have 2 options to enter into the Engineering Programmes at First City UC.

  1. First, you can join the Foundation in Engineering, Science & Technology for 1 year and then enter into Year 1 of the Engineering degree programme.
  2. The Second pathway is to take either the Diploma in Electronic Engineering or Diploma in Mechatronic Engineering. The Engineering Diplomas will take 2 years to complete and then you will enter into Year 2 of the Engineering degree programme.

SPM or IGCSE/O-Level students who have completed their Pre-University Course from other institutions may enter into the Engineering degree depending on the Entry Requirements.

What are the Entry Requirements into the Foundation in Engineering, Science & Technology Programme at First City UC?
The engineering labs at First City University College are well-equipped to meet the stringent requirements of MQA
The engineering labs at First City University College are well-equipped to meet the stringent requirements of MQA
  • SPM – Minimum 5 credits (including of English and Mathematics) and including Physics for progression to Engineering Degrees. Minimum 5 credits (including of English and Mathematics) and including credit in Additional Mathematics or credit in Mathematics and Science/Technology/Engineering subjects for progression to Software Engineering or Computer Science Degrees. Minimum 5 credits (including of English and Mathematics) for progression to Information Systems or Information Technology Degrees
  • UEC – Minimum 4Bs (including English and Mathematics)
  • GCE O-LEVEL – Minimum 5 credits (including English and Mathematics)
  • OTHER QUALIFICATIONS -Equivalent qualifications which are recognized by the Malaysian Qualifications Agency
What are the Entry Requirements into the Engineering Diploma Programmes at First City UC?
  • SPM – Minimum 3Cs (including Mathematics & 1 Science subject and at least a pass in English)
  • UEC – Minimum 3Bs (including Mathematics & 1 Science subject and at least a pass in English)
  • GCE O-LEVEL – Minimum 3Cs (including Mathematics & 1 Science subject and at least a pass in English)
  • OTHER QUALIFICATIONS – Equivalent qualifications recognised by the Malaysian Qualifications Agency
What are the Entry Requirements into the Engineering Degree Programmes at First City UC?
  • STPM – Minimum 2Cs (including Mathematics and Physics)
  • UEC – Minimum 5Bs (including Mathematics and Physics)
  • GCE A-LEVEL – Minimum 2Cs (including Mathematics and Physics)
  • FOUNDATION/MATRICULATION – Pass with minimum CGPA 2.0
  • DIPLOMA – Pass with minimum CGPA 2.0 / Diploma (Level 4, MQF) in the related field
  • OTHER QUALIFICATIONS – Equivalent qualifications which are recognized by the Malaysian Qualifications Agency

Why is the Accreditation by Board of Engineers Malaysia (BEM) important in my Engineering Degree Studies?

Engineering lab at First City University College
Engineering lab at First City University College

Engineering degrees that are accredited by the Board of Engineers Malaysia (BEM) are recognised by overseas countries for work. Students should choose a private university in Malaysia to study the engineering course that’s accredited by BEM.

Undergraduate degrees from top private universities in Malaysia such as First City UC typically take four years to complete and give you a broad understanding of the subject field, as well as developing your theoretical and practical techniques which could be transferred to almost any industry.  The engineering degrees are four years in duration because of the requirement by the Board of Engineers Malaysia (BEM) in order for graduates to become professional engineers.

What is the Board of Engineers Malaysia (BEM)?
Experienced and Qualified lecturers provide personal attention to First City University College sudents
Experienced and Qualified lecturers provide personal attention to First City University College sudents

The Board of Engineers Malaysia (BEM) registers graduates and professional engineers under the Registration of Engineers Act 1967 (Revised 2002). The requirement for registration as a graduate engineer is a degree in engineering recognised by the Board. Board of Engineers Malaysia (BEM) is the only body certifying Professional Engineers in Malaysia.

This regulatory body for engineering practices in Malaysia was set-up by the Malaysian government under the Registration of Engineers Act (1967) to administer and to enforce the Engineering Act and its provisions to protect public interest.

Only Graduate Engineers and Professional Engineers registered with the Board of Engineers, Malaysia (BEM) are entitled to practice engineering in Malaysia.  All engineering practitioner MUST register with BEM within 6-months of practice.

A professional engineer (Ir or PEng) is a person who is licensed to practice to practice engineering in Malaysia after meeting all requirements of the  (e.g. pass PI Examination).

What are the Benefits of Becoming a Professional Engineer in Malaysia?
Top notch engineering equipment at First City University College
  1. If you ever want or need to become a consulting, engineer, you must be licensed as an Ir or P.Eng.
  2. Only a Ir/P.Eng. can sign and seal engineering documents that are engineering documents that are submitted to a public authority or for public and private clients.
  3. Many companies encourage licensure and some even pay a bonus for becoming a P.Eng.
  4. In education, more universities are requiring a Ir/P.Eng. license to lecture in the engineering faculty or for holding certain positions.
  5. In some industries such as utilities, and government positions, a P.Eng. is required for specified jobs or positions.
  6. With the engineering profession now operating in an international environment, licensing may be required to work in or for other countries. You will be prepared in the event your career moves in this direction (e.g. APEC Engineers, EMF Int. Engineer Register, Washington Accord)

What are the Benefits of the Washington Accord for BEM Accredited Courses?

A wonderful friendly study environment at First City University College

The Washington Accord is a multinational agreement signed in 1989, which recognises the substantial equivalency of engineering degree programmes accredited by the responsible bodies in each of the signatory countries such as the Board of Engineers Malaysia (BEM).

Washington Accord is an agreement among the engineering quality assurance organisations of several nations that recognises the substantial equivalency of programs accredited by those organisations.

The agreement paves the way for mutual recognition of accredited programmes, establishing the notion that graduates have met the academic requirements for entry to the practice of engineering in any signatory country.

Signatories have full rights of participation in the Accord; qualifications accredited or recognised by other signatories are recognised by each signatory as being substantially equivalent to accredited or recognised qualifications within its own jurisdiction.

Admission to the Accord is more importantly an endorsement that the engineering education system of the member nation has demonstrated a strong, longterm commitment to quality assurance in producing engineers ready for industry practice in the international scene.

As a Washington Accord signatory, Malaysia’s degrees that have been accredited by Engineering Accreditation Council (EAC) will be accepted by other Washington Accord signatories. This means that students who study in universities with engineering degrees that are accredited by MQA and Board of Engineers Malaysia (BEM) may find work in other countries that have signed the Washington Accord.

Board of Engineers Malaysia (BEM) uses as a guide the list for Professional/Chartered Engineer by the accreditation organisations of the country where the degree is issued. Candidates are advised to check with the relevant Engineering Accreditation bodies’ web site for the list recognised degrees of professional chartered level. However, Board of Engineers Malaysia (BEM) reserves the right to review the list at any time without notice.

What are the Engineering Facilities at First City University College?

Library at First City University College
Library at First City University College

First City University College campus has a built up area of 250,000 sq.ft. and has a comprehensive range of facilities for students.

There are seven Engineering Laboratories, which are well-equipped to meet the stringent requirements of First City University College’s Partner Universities and The Malaysian Qualifications Agency (MQA).

The engineering laboratories include the Digital Power & Control Laboratory, the Microprocessor & Electronic CAD Laboratory, Mechatronics Laboratory and Electronic Design Automation (EDA) Laboratory. The Computer Centre maintains the campus-wide network based on the Windows platform. In the E-Info Lab, students enjoy high speed access to the Internet and its resources.

ENGINEERING LABORATORIES

AnalogueElectronicsLab

ANALOGUE ELECTRONICS LABORATORY

CommunicationandSignalProcessingLab

COMMUNICATION & SIGNAL PROCESSING LABORATORY

DigitalElectronicLab

DIGITAL ELECTRONICS LABORATORY

ElectronicComputerAidedDeisgnLab

ELECTRONIC COMPUTER AIDED DESIGN LABORATORY

Electronic-Prototype

ELECTRONIC PROTOTYPING LABORATORY

Engineering-Workshop

ENGINEERING WORKSHOP

Fluid-Mechanic-Lab

FLUID MECHANICS LABORATORY

IoT-Embbedded-Systems

IOT & EMBEDDED SYSTEMS LABORATORY

Materials-&-Advanced-Manufacturing-Process-Lab

MATERIALS & ADVANCE MANUFACTURING PROCESS LABORATORY

Thermodynamics1

THERMODYNAMICS LABORATORY

Campus Facilities

Wireless connection to the campus network has been installed and implemented. The Centre also houses the Multimedia Laboratory, Macintosh Laboratory and CAD Laboratory. There are two digital language labs equipped with 50 microcomputers installed with CD-ROM based programme-ware for English learning.

Students attend lectures in spacious lecture rooms and lecture theatres.

The University College has a well-stocked and ISO certified Library. It provides seats for 260 users. The Library is well-equipped with individual study spaces and discussion rooms. It has a wide range of books, reports, periodicals, and company annual reports, covering all disciplines of study in the College. A fully-equipped multimedia room is available for students to use the CD-ROMs and other non-print materials in the Library.

With increasing student population, we work towards fulfilling our mission to provide the best teaching and learning facilities, we embarked on a Phase II campus expansion. The new 350,000 square feet new building – almost twice the size of and located adjacently to the current premise – houses additional lecture rooms, studios, seminar rooms, workshops, state-of-the-art laboratories, an IT Centre, a library and a MBA Centre.

State-of-the-art facilities for the whole campus include:

Engineering
  • Digital Power & Control Laboratory
  • Microprocessor & Electronic CAD Laboratory
  • Mechatronics Laboratory
  • Electronic Design Automation (EDA) Laboratory
IT Centre
  • E-Info Lab
  • Multimedia Laboratory
  • Macintosh Laboratory
  • CAD Laboratory
Other learning facilities
  • Spacious lecture rooms and theatres
  • State-of-the-art video conference facilities
  • ISO-certified library
  • Multimedia room
  • MBA Centre
Common Facilities at First City University College
  • Lecture Hall
  • Counselling Area
  • Student Services Department
  • Main Hall
  • Cafeteria
  • Lecture Rooms
  • Indoor Car Park
  • Reception Area
  • Lobby
  • Library
Sports And Recreational Facilities at First City University College
  • Multi-Purpose Hall
  • Badminton Courts
  • Football Field
  • Basketball Court
  • Volleyball Court
  • Music Room
  • TV Lounge
  • Table Tennis
  • Taekwondo
  • Student Lounge

 

Write your comment or question & our experts will reply you soon

This site uses Akismet to reduce spam. Learn how your comment data is processed.

With More than 20 years of Experience & Knowledge in Higher Education, I will Help You Choose the Right Course & the Best Private University so that You Can Find a Job with a Stable Salary!

Fill in the Form for Genuine Expert Advise

If you are the Parent, please provide your Child’s Details

By filling up the form you accept our Privacy Policy & allow us to share with our partner universities related to your interests. EduSpiral Consultant Services abides by the Personal Data Protection Act (PDPA) & do NOT sell your Personal Data.